USV1H010MFD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are the most commonly used type of capacitor. In its basic form, an aluminum electrolytic capacitor consists of two aluminum foils wrapped around an electrolyte-soaked paper separator. It is commonly used in applications such as capacitive power supplies, bypass circuits, and coupling applications. The USV1H010MFD is one of the many aluminum electrolytic capacitors on the market today.

The USV1H010MFD is a much larger electrolytic capacitor than most other varieties, and it is ideal for applications that require high current inrush and high voltage surge protection. Its large size makes it capable of storing more energy, allowing it to absorb high energy surges and offer long-term protection for sensitive electronic components. This makes it well-suited for use in a variety of applications, such as motor control circuits, servo systems, communication systems, and smart grid applications.

The USV1H010MFD is a polarized capacitor, meaning that it has an anode and a cathode, and each needs to be connected to the correct terminals. The anode should be connected to the positive voltage source, and the cathode should be connected to ground or the negative voltage source. This is an important factor to consider when using this capacitor, as polarity reversal can cause the capacitor to fail.

The USV1H010MFD also has a maximum operating temperature of 70°C. This means that, when used for continuous duty tasks, the temperature of the capacitor should not exceed this temperature. Failure to do so can reduce the life of the capacitor and result in decreased performance.

The USV1H010MFD is a long-term protection capacitor that can be used to protect sensitive electronic components from potential damages caused by electrical faults or over-voltage conditions. It is designed to absorb and dissipate surge currents, and its large size allows it to store more energy. This makes it more capable of addressing the needs of high-current inrush and over-voltage surge protection applications. It also has a long lifespan, due to its design and the high-quality materials used in its manufacture.

In summary, the USV1H010MFD is a type of high-capacity aluminum electrolytic capacitor that is suitable for applications that require high-current inrush and over-voltage surge protection. It is a polarized capacitor, so the anode and cathode need to be connected to the correct terminals. The capacitor has an operating temperature of 70°C and is designed to store more energy, allowing for long-term protection of sensitive electronics.

The specific data is subject to PDF, and the above content is for reference