250MXG270MEFC22X25

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors refer to capacitors in which aluminum (Al) anode foil and electrolytic paper impregnated with electrolyte are wound or connected in parallel to provide a large capacity. The 250MXG270MEFC22X25 caps are a type of aluminum electrolytic capacitors that encompasses an enclosure of cylindrical cells with a radial leaded 2-pin termination. This capacitor offers superior performance with a capacitance of 270µF and voltage rating of 250VAC.

The 250MXG270MEFC22X25 capacitor finds multiple applications in various systems. Its extensive use is in switching power supplies, where it is employed as the main bulk capacitance filter for higher ripple current capability and improved established parameters. It is also deployed in motor drives and variable speed controllers where increased capacitance is needed on control circuits. In audio equipment, it serves as a bypass capacitor to eliminate the high-frequency noise by suppressing the current flow between the next stages. It is also used in power factor correction, UPS systems, general industrial electronics, solar inverters, and in any other application where high capacitance is required.

The working principle employed by the 250MXG270MEFC22X25 capacitors is based on the Faraday law of electrolysis. According to the law, when two dissimilar metals are submerged into an electrolytic solution, an electromotive force is established between them. This force is used to store energy into the capacitor in the form of electrical potential energy. This potential energy is equal to the product of the capacitance and the applied voltage. This means that this capacitor would have 270µF capacitance at a voltage of 250VAC. The two terminals are connected to the dielectric, and the electrical charge is driven into the capacitor by the source. This voltage difference is held on the capacitor until the voltage drops or the polarity reverses.

The construction of the 250MXG270MEFC22X25 capacitor involves a combination of cylindrical cells, capacitor foil and adhesive tape and is designed to provide superior performance. The capacitor foil used in the construction is purely made of aluminum and consists of two separate foils, an anode and a cathode. The anode foil is etched with a corrugated pattern and coated with a thin layer of activated electrolyte for efficient current flow. The cathode foil also consists of the same etched pattern and is converted into a spacer by partially impregnating its surface with electrically insulating material. The cell assembly is held together together in place with an adhesive tape.

The 250MXG270MEFC22X25 capacitor is also equipped with radial leaded 2-pin termination, which gives it great flexibility for use in various applications. The 2-pin terminals allow easy connections with other components and help in dissipating locking heat from capacitors, thus increasing the reliability. It also features a low ESR (Equivalent Series Resistance) feature, that increases its efficiency in eliminating high frequency noise.

In conclusion, aluminum electrolytic capacitors like the 250MXG270MEFC22X25 have multiple applications in various systems due to their superior performance and improved established parameters. The capacitance of the capacitor is regulated by the Faraday law and its construction involves a combination of cylindrical cells, capacitor foil and adhesive tape. The capacitor is further equipped with radial leaded 2-pin termination that increases its reliability by dissipating locking heat and low ESR feature for eliminating high frequency noise. Thus, making it the ideal choice for multiple applications.

The specific data is subject to PDF, and the above content is for reference