What are the installation requirements and uses of Siemens humidity sensors?
Humidity is closely related to our lives. People will feel uncomfortable if the humidity is too high or too low. In addition to the body's ability to sense the impact of humidity on us, the humidity of the air still has an effect on the machine's work during the work of the machine. Great influence. Siemens is a brand with a relatively mature manufacturing process for humidity sensors, and many consumers choose him.
Siemens brand introduction
Germany Siemens AG was founded in 1847, is a global leader in the field of electrical and electronic engineering. Siemens has been in China since 1872. For more than 140 years, it has continuously supported China’s development with innovative technology, excellent solutions and products, and with outstanding quality and reliable reliability, leading technological achievements, The unremitting pursuit of innovation has established a leading position in the Chinese market. In fiscal year 2015 (October 1, 2014 to September 30, 2015), Siemens' total revenue in China reached 6.94 billion euros, with more than 32,000 employees. Siemens has developed into an inseparable part of China's society and economy, and sincerely cooperates with China to work together to achieve sustainable development.
Installation requirements of Siemens humidity sensor
Used for water supply temperature control:
On the heating loop: if the water pump is installed on the water supply pipe, the sensor is installed directly behind the water pump; if the water pump is installed on the return water pipe, the sensor is installed 1.5 to 2 m behind the mixing valve
Used for temperature limitation of return water:
The sensor should be installed on the return water pipe that can accurately collect the limited temperature. The sensor should be installed at the elbow of the pipeline so that the insertion rod or protective sleeve directly faces the direction of water flow.
The installation location of the sensor must be the place where the water is completely mixed, and it must be downstream of the pump, or if the pump is installed at the return water, at least 1.5 meters away from the water flow mixing place.
When installing the sensor, the wire cannot enter from the top. For all types of sensors, the minimum insertion length cannot be less than 60 mm. The sensor must not be covered by insulation. Before installing the sensor, the threaded fitting or T-piece G ½ must be welded to the pipe.
The purpose of Siemens humidity sensor
Measuring weight and temperature are the same. When selecting a humidity sensor, you must first determine the measurement range. Except for the meteorological and scientific research departments, temperature and humidity measurement and control generally do not require full humidity (0-100%RH) measurement. In today's information age, sensor technology is closely integrated with computer technology and automatic control technology. The purpose of measurement is to control, and the measurement range and the control range are collectively called the use range. Of course, for users who do not need to engage in measurement and control systems, just choose the universal type hygrometer.
The above are the installation notes and applicable scope of the Siemens humidity sensor introduced by Comfort 100. Although the name of the humidity sensor sounds very common, it still contains many high-tech technologies, which are not used in our daily life. Siemens, as a long-established electronic appliance brand, is also very good in the field of humidity sensors.
If you want to know more, our website has product specifications for humidity sensors, you can go to ALLICDATA ELECTRONICS LIMITED to get more information