What are the commonly used wireless sensors in aquaculture monitoring systems?
Breeding is a technical task, and it is very difficult for laymen to do a good job with both hands. Aquaculture is not an emerging industry, but this industry has always required painstaking efforts to operate. To do aquaculture, it is necessary to do a good job in the treatment of water temperature and dissolved oxygen.
1. Wireless water temperature sensor
Water temperature plays a key role in aquaculture. Too low temperature will not only cause the fish to grow too slowly, but low temperature will reduce the enzyme activity in the fish body and cause the fish to die directly; too high water temperature will also reduce the enzyme in the fish body The degree of activity leads to its death. Therefore, the use of the water temperature sensor becomes particularly important. The Xinxin IoT water temperature sensor can directly detect the temperature of the water and report this value to the management staff, so that the management staff can clearly see the current temperature value of the water temperature.
2. Wireless dissolved oxygen sensor
Oxygen is the decisive factor for animal growth. Of course, the same is true for fish growing in water. It needs to survive through dissolved oxygen in the water. If the lack of oxygen is serious, it will directly cause the fish to die. The IoT dissolved oxygen sensor can directly detect the concentration of dissolved oxygen in water. The lower the temperature, the higher the dissolved oxygen concentration. Through the detected oxygen concentration, the farmer can know whether the pond water is deficient in oxygen, so that timely adjustment control can be made Fish grow safely.
The wireless switch controller can automatically start and stop the aerator according to the temperature and the upper and lower limits of the dissolved oxygen concentration set by the user to reduce the water temperature and increase the amount of dissolved oxygen. Its control signal belongs to wireless transmission; the load is above 1.5Kw.
4. Wireless Smart Gateway
The wireless intelligent gateway connects the monitoring system to the network, receives the monitoring data of the sensor, and transmits the data to the user's mobile phone or Xinxin data center; receives the control information sent by the user's mobile phone to control the start and stop of the aerator.
If you want to know more, our website has product specifications for wireless sensors, you can go to ALLICDATA ELECTRONICS LIMITED to get more information