0457501111-05-L9-D

Series:	Mini-Fit® Plus HCS™ 45750
Part Status:	Active
Lead Free Status / RoHS Status:	--
Contact End:	Socket to Socket
Moisture Sensitivity Level (MSL):	--
Length:	5.00" (127.00mm)
Wire Gauge:	18 AWG
Contact Finish:	Tin
Color:	Blue
Contact Finish Thickness:	100.0µin (2.54µm)
Number of Rows:	1
Number of Conductors:	1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires and Pre-Crimped Leads

Jumper wires and pre-crimped leads can both be used to make electrical connections between two points in a circuit. Both can serve various purposes such as providing power, signal, or control. The difference between the two is the method of termination used to make the connection.

Jumper Wires

Jumper wires are bare wires that are typically composed of a metal conductor, such as copper. A conductor is a material that allows an electrical current to flow through it. Jumper wires can either have one end stripped of its insulation or bare at both ends. The ends of a jumper wire can either be crimped or soldered to another wire or a component. For this reason, jumper wires are often used to create PCB (Printed Circuit Board (PCB)) prototypes or to repair existing connections and make new ones.

Pre-Crimped Leads

Pre-crimped leads, also referred to as pre-cut jumper wires, are pre-manufactured wires that already have a crimped or insulated termination on one or both ends. This pre-attached termination usually comes in the form of a spade lug, ring terminal, or bare-wire end. The insulated end allows for a secure and corrosion-resistant connection that can be used to connect two points together. Pre-crimped leads are commonly used in mass-manufactured electronic products as they offer a more reliable connection when compared to jumper wires.

Application of 0457501111-05-L9-D

The 0457501111-05-L9-D is a terminal block connector that is used to make electrical connections between two points. This connector consists of a pair of contacts that are typically made of copper and are crimped or soldered onto a mating component. This connector can be used to create power, signal, and control connections in a circuit.

Working Principle of 0457501111-05-L9-D

The 0457501111-05-L9-D terminal block connector works by establishing an electrical connection between two components. The connection is made through an insulated contact that is secured onto a mating contact. When both contacts are secured in place, the connection is complete and the current will flow through the wire to the other component. The connector will also provide insulation to ensure that the connection does not become shorted out by the surrounding environment.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description