1.5SMC56A M6G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 1.5SMC56A M6G is a surge protection device used to protect Against Electrostatic Discharge and other transients, and falls into the category of Transient Voltage Suppressors (TVS). While some protection devices prevent other electronic components from being damaged, the 1.5SMC56A M6G works by diverting excess current away from the electronic components, which is very important for electronic device.The most common application for the 1.5SMC56A M6G is protection for high speed data lines such as I2C, USB, Ethernet, and HDMI. It uses several components including Zener diodes, a Schottky diode, and a TVS diode in order to provide a high level of protection.The basic principle of the 1.5SMC56A M6G is to clamp the voltage during overvoltage cases and thus protect the over voltage components with high rate of change in voltage. This is in comparison with some protection components which require a buffer between the device and the electrical danger, and require slower rate of change in order to protect the components.The important components of the 1.5SMC56A M6G are the Zener diodes and Schottky diodes. The Zener diodes are generally paired with Schottky diodes in order to provide a voltage clamping capabilities. When the voltage across the Zener diode reaches the breakdown voltage, the excess current is diverted to the Schottky diode, which limits the current surge thus protecting the circuit.The TVS diode is also an important component of the 1.5SMC56A M6G. The TVS diode acts as a short circuit when the voltage rises to the breakdown voltage, thus diverting the excess current away from the protected circuit.In summary, the 1.5SMC56A M6G is a surge protection device used to protect against ESD and other transients, and falls into the category of Transient Voltage Suppressors (TVS). It uses several components including Zener diodes, Schottky diode, and TVS diode in order to provide a high level of protection. The basic principle is to clamp the voltage during overvoltage cases and thus protect the over voltage components with high rate of change in voltage, and to divert the excess current from the protected circuit. It is very important in protecting electronic circuits from damage due to external threats.

The specific data is subject to PDF, and the above content is for reference