Series:	ACPC
Part Status:	Active
Pressure Type:	Differential
Operating Pressure:	0.36 PSI (2.49 kPa)
Output Type:	Wheatstone Bridge
Output:	0 mV ~ 20 mV (12V)
Accuracy:	±1%
Voltage - Supply:	16V
Port Size:	Male - 0.18" (4.57mm) Tube, Dual
Port Style:	Barbless
Features:	Temperature Compensated
Termination Style:	PCB
Maximum Pressure:	5 PSI (34.47 kPa)
Operating Temperature:	-25°C ~ 85°C
Package / Case:	4-SIP Module
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure Sensors, Transducers: 10 INCH-D-CGRADE-MINI Application Field and Working Principle

Introduction

The 10 INCH-D-CGRADE-MINI pressure sensor is a high-precision pressure measurement device developed for a wide range of applications, such as air compressors, industrial machinery, chemical plants, data centers, and so on. It is a pressure transducer composed of key components such as a diaphragm, a manifold and hose, and a pressure sensor. This article will discuss the application fields and working principle of the 10 INCH-D-CGRADE-MINI pressure sensor.

Application Field

The 10 INCH-D-CGRADE-MINI pressure sensor is primarily applied to measure the pressure value of various systems, such as pipelines, tanks, valves, and other pressure vessels. It has been widely used in air compressors, industrial machinery, chemical plants, data centers, gas metering, and other applications.Air compressors are one of the most commonly used areas of the 10 INCH-D-CGRADE-MINI pressure sensor, as it provides an accurate measurement of the amount of air in a compressor. This allows users to accurately evaluate the efficiency and overall performance of an air compressor. Industrial machinery, such as pumps and turbines, also rely heavily on pressure sensors to monitor and control pressure and flow within a system, ensuring that the system is running at optimal levels. Chemical plants use pressure sensors to monitor process lines, tanks, and valves for leaks, as well as to measure and control flow rate and pressure. Data centers also rely on the 10 INCH-D-CGRADE-MINI pressure sensor for efficient operation, using it to inspect for overheating caused by excessive airflow. Finally, gas metering applications rely on the 10 INCH-D-CGRADE-MINI pressure sensor to measure and control the flow rate and pressure of gas in gas pipelines, ensuring accurate and safe gas transfer.

Working Principle

The working principle of the 10 INCH-D-CGRADE-MINI pressure sensor is based on a diaphragm made from a metal alloy such as stainless steel or titanium. This diaphragm is connected to a manifold, which is filled with a pressure-sensitive fluid. The pressure-sensing fluid is typically glycerin or silicone oil. The pressure in the manifold is then transmitted to the diaphragm via a hose and a spring. When pressure is applied to the sensor, the diaphragm is forced to move, thus compressing or stretching the spring inside the manifold. This change in spring tension is then converted into an electrical signal that is monitored by the pressure sensor. The electrical signal is then transmitted to the control unit, which can be programmed to take action based on the reading.Another key component of the 10 INCH-D-CGRADE-MINI pressure sensor is the transducer. This transducer is used to convert the electrical signals into a pressure signal. This pressure signal is then connected to a pressure gauge, allowing users to view the pressure reading at any time.

Conclusion

The 10 INCH-D-CGRADE-MINI pressure sensor is a high-precision pressure measurement device designed for a wide range of applications. It is composed of a diaphragm, a manifold, a hose, and a pressure sensor. The diaphragm is connected to a manifold filled with a pressure-sensitive fluid, and this fluid transmits the pressure to the diaphragm. The pressure is then converted into an electrical signal that is monitored by the pressure sensor and sent to a control unit, which can be programmed to take action based on the reading. Additionally, a transducer is used to convert the electrical signals into a pressure signal, which is then connected to a pressure gauge, allowing users to view the pressure reading at any time.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description