100ZLH270MEFCGC16X20

Polarization:	Polar
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	0.866" (22.00mm)
Size / Dimension:	0.630" Dia (16.00mm)
Lead Spacing:	0.295" (7.50mm)
Impedance:	58 mOhms
Ripple Current @ High Frequency:	1.75A @ 100kHz
Ripple Current @ Low Frequency:	875mA @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	ZLH
Operating Temperature:	-40°C ~ 105°C
Lifetime @ Temp.:	10000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	100V
Tolerance:	±20%
Capacitance:	270µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Box (TB)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Aluminum Electrolytic Capacitors are widely used in many applications due to their high energy density, high capacitance per unit volume, and relatively low ESR. These capacitors are composed of two electrodes, an anode and a cathode, sandwiched between two aluminum foil separator paper layers. The 100ZLH270MEFCGC16X20 is a radial type aluminum electrolytic capacitor from Panasonic. It has a wide range of applications and can be used for signal and power filtering for motor drive circuits, power supplies, signal processing, and various automotive and consumer electronic components.

Construction

The 100ZLH270MEFCGC16X20 is composed of two concentric aluminum foils separated by special paper, both of which function as anodes. A semiconductor layer, made up of an oxide layer formed by electrolysis, acts as the dielectric layer between the two layers of aluminum foil. The two electrodes are connected together by a liquid electrolyte, which is usually comprised of ethylene glycol and boric acid, and acts as the electrolyte. Finally, the case of the capacitor is usually made out of aluminum or plastic, and is covered with epoxy paint to increase durability, to seal the electrolyte inside, and to provide better product identification.

Specifications

The 100ZLH270MEFCGC16X20 is a radial type aluminum electrolytic capacitor with the following specifications:• Rated Voltage: 16 VDC• Rated Capacitance: 270 µF• Capacitance Tolerance: ±20%• Terminals: Tinned lugs• Standard Dimensions: 22.0mm dia. X 20.5mm circumference• Weight: 7.8 grams• Operating Temp Range: - 40°C to + 105°C• Life: 1000 Hours at 105°C

Working Principle

The working principle of the 100ZLH270MEFCGC16X20 is based on Faraday’s law of electrolysis, which states that the amount of charge (Q) stored on the electrode is proportional to the electrical potential difference (V) between the two electrodes multiplied by the capacitance (C). Therefore, the stored charge is given by: Q = CVDuring operation, the capacitor stores electrical charge on the plates by attracting ions from the electrolyte surrounding it, forming a capacitance within the capacitor. As the applied voltage increases, more charge is stored and the capacitance increases, allowing more current to flow through the capacitor. When the capacitor is discharged, the charge stored on the plates is transferred back into the electrolyte, and the total charge stored on the plates and the capacitance of the capacitor decrease. Heating and cooling causes the electrolytic solution to expand and contract, respectively, changing the total capacitance, and allowing for a greater range of voltage and current levels to be handled.

Applications

The 100ZLH270MEFCGC16X20 is a radial type aluminum electrolytic capacitor with a wide variety of applications. It is commonly used for motor drive circuits, power supplies, signal processing and automotive and consumer electronic components. Furthermore, due to its high capacitance and long operating life, it is used in applications where high capacitance is required, such as power filtering for uninterrupted power supplies, audio equipment, medical equipment, and many other applications.

Conclusion

The 100ZLH270MEFCGC16X20 is a radial type aluminum electrolytic capacitor from Panasonic offering high energy density, high capacitance per unit volume, and relatively low ESR which make it ideal for a variety of applications, from motor drive circuits to consumer electronic components. Furthermore, this capacitor has a wide range of operating temperatures and extreme life expectancy, making it a reliable and robust component with a long life expectancy.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description