10AX820MEFC10X9

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are one of the most popular types of capacitors used in a wide range of applications and they have many attributes. 10AX820MEFC10X9 is one type of aluminum electrolytic capacitors, which is suitable for various applications and working principles.

Aluminum electrolytic capacitors (electrolytic capacitors) are formed by wetting the anode foil and cathode foil by electrolyte. The anode foil is an aluminum foil, which is covered with a dielectric film of metal oxides. This dielectric film is formed on the anode foil by anodic oxidation treatment. The electrolyte forms a porous layer and is held between the cathode and anode. Due to the electrochemical reaction between the electrolyte and the aluminum foil of the anode, a massive number of micro-spaced electric double-layers and capacitance-storing effects are generated.

As a type of aluminum electrolytic capacitors, the 10AX820MEFC10X9 capacitors feature extreme low impedance, full operating temperature range and long life. The temperature range goes from as low as -25 degree Celsius to as high as 105 degree Celsius. Its size is 20mm diameter x 45mm length.

The 10AX820MEFC10X9 aluminum electrolytic capacitors are typically made at relatively large sizes, ranging up to a few thousand farads. These capacitors are mainly used filter applications and typically should not be used in timing or oscillatory circuits. It can be used in communications systems, TV tuners and so on.

The 10AX820MEFC10X9 aluminum electrolytic capacitors has numerous applications and is widely used in power electronics, audio equipment, radio communication side, measure, etc. The 10AX820MEFC10X9 capacitors are generally used for noise suppression, ripple reduction, and surge absorption.

Ripple current of 10AX820MEEC10X9 aluminum electrolytic capacitors depends on the material used for the capacitor plate. It is typically expressed in rms value and changes according to the ripple frequency. The ripple current of the 10AX820MEFC10X9 capacitors is about 1.4 A at 100 kHz and 0.5A at 1MHz.

The 10AX820MEFC10X9 aluminum electrolytic capacitors’ working principle is rather simple. When the capacitor is connected to the power source, current starts to flow through the capacitor. The electric charge runs across it, collecting at the metal plates. This electrochemical action causes the metal oxides to form a film around the plates, providing insulation between them. This causes a capacitance to form between the plates, allowing current to be stored. When the power source is removed, residual charge stored in the plates will flow back to the power source.

To sum up, 10AX820MEFC10X9 aluminum electrolytic capacitors are one type of aluminum electrolytic capacitors. The 10AX820MEFC10X9 capacitors feature low impedance and long life, which is suitable for noise suppression, ripple reduction and surge absorption. Their principles of operation is quite simple, when power is applied, a film of metal oxides forms, creating a capacitance and storing an electric charge.

The specific data is subject to PDF, and the above content is for reference