1156290000

Voltage - UL:	300V
Insulation Height:	0.449" (11.40mm)
Contact Tail Length:	0.138" (3.50mm)
Housing Material:	Polyamide (PA), Nylon, Glass Filled
Contact Material:	Copper Alloy
Wire Strip Length:	--
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	IP20
Material Flammability Rating:	UL94 V-0
Features:	Latch Holder
Contact Mating Finish:	Tin
Operating Temperature:	130°C
Color:	Black
Wire Gauge or Range - mm²:	--
Wire Gauge or Range - AWG:	--
Series:	Omnimate SV
Current - UL:	33A
Voltage - IEC:	1kV
Current - IEC:	41A
Mounting Type:	Through Hole
Termination Style:	Solder
Plug Wire Entry:	--
Header Orientation:	90°, Right Angle, Under Board
Pitch:	0.300" (7.62mm)
Number of Levels:	Hybrid
Positions Per Level:	12 (4 Power + 8 Signal)
Number of Positions:	12
Type:	Header, Male Pins, Shrouded (4 Side)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Headers, Plugs and SocketsTerminal blocks, headers, plugs, and sockets are essential components in any electrical system. They are used to connect and disconnect electrical circuits and ensure that the same circuits are used in the same type of equipment. Terminal blocks are specially designed to provide reliable and safe connections between two conductors or devices, without worrying about misalignment or arcing when exposed to current flow or vibration.A terminal block can be used to connect two pieces of equipment by providing a terminal for each wire in the circuit. It may also contain additional features such as a fuse or a circuit breaker, which could protect downstream equipment. The two types of terminal block are insulation-displacement connectors (IDCs), which is the most common type of terminal block and has blades that can pierce the insulation of the wire and make a connection, and screw-clamp terminal blocks which have screws to secure any connection in the terminal block.Headers, plugs, and sockets are essentially the same thing as terminal blocks but are connected differently. Headers usually have two pins that protrude from the sides and create an opening for the wire terminations to be inserted. Plug connectors take the wires terminated in the header and plug into the header, completing the connection. Socket connectors form third portions of the connection and are the receptacles for the mating plugs. Both plugs and sockets may contain features such as springs or a lever designed to provide a secure connection. Similarly, a socket connector can be used to connect two devices in a circuit. It can be used for the same purpose as a terminal block, but it can also be used to ensure that the circuits are properly connected when removed and inserted into another device.In addition to being used in a variety of electrical systems, terminals, headers, plugs, and sockets are also used in industrial control systems and in communications systems. In industrial control systems, these components are used to implement the transfer of data or instructions to devices to enable them to work. In communications systems, these components are used to connect two data points, enabling management or control of the communications system.Terminal blocks are available in several different Volt and Amp ratings, such as 12V, 24V, and 48V, for different application fields and can be used in both AC and DC circuits. Similarly, all types of terminal blocks are available in a wide range of sizes and colors, which allows for the selection of the most suitable block for a particular application.Terminal blocks are designed to minimize the chances of damage during operation and feature some form of disconnection prevention, such as finger or barrier wiring that prevents accidental contact with live parts. Some terminal blocks even feature a lockable connector that enables them to be locked in place, preventing any inadvertent disconnections.In terms of their working principle, terminal blocks are all designed to provide safe connection of two wires by creating a short circuit between them when the wires are inserted into the terminal block. This can be done via physical contact of the wires’ outer insulation, or by having blades that pierce through the insulation and make contact with the conductors. Headers, plugs, and sockets also work to enable the secure transfer of power and data signals between two devices by providing an opening that can affect the transfer of the signals.In summary, terminal blocks, headers, plugs, and sockets are essential components in any electrical system and are used to connect two pieces of equipment, provide fast and secure connections, and ensure that the circuits are properly connected when removed and inserted into another device. They all work to create a short circuit between the two wires and transfer data and power signals between two devices in a safe and efficient manner.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description