150D104X9100A2TE3

Lifetime @ Temp.:	1000 Hrs @ 125°C
Failure Rate:	--
Features:	General Purpose
Ratings:	--
Manufacturer Size Code:	A
Lead Spacing:	--
Height - Seated (Max):	--
Size / Dimension:	0.135" Dia x 0.286" L (3.43mm x 7.26mm)
Package / Case:	Axial
Mounting Type:	Through Hole
Series:	TANTALEX®, 150D
Operating Temperature:	-55°C ~ 125°C
ESR (Equivalent Series Resistance):	--
Type:	Hermetically Sealed
Voltage - Rated:	100V
Tolerance:	±10%
Capacitance:	0.1µF
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum Capacitors Tantalum capacitors are special types of capacitors that use tantalum as the anode. These capacitors have been around since the 1950s and have a number of advantages compared to conventional capacitors. The most notable of these are their relatively low volumetric efficiency, small size, and high dielectric strength. In addition, they are able to withstand temperatures of up to 125°C as well as being relatively stable over time.Tantalum capacitors are typically used when a high degree of volumetric efficiency is desired. Their small size makes them ideal for applications where space is at a premium, such as within portable electronic devices.The 150D104X9100A2TE3 is a type of tantalum capacitor that uses the 150D form factor. This form factor is defined by the physical size of the device. The 150D capacitor measures 10.4mm in diameter and 9.1mm in height. It can hold up to 100µF of capacitance, making it suitable for applications such as audio circuits.The 150D104X9100A2TE3 is able to operate at temperatures between -55°C and 125°C and has an approximate ESR (Equivalent Series Resistance) of 0.24 ohms. In addition, it has an rated voltage of 25V and is rated for an operating voltage of 16V. It also features a Crimped Wire Termination, allowing it to be connected to a circuit board with ease.The working principle of a tantalum capacitor is the same as any other type of capacitor. It works by storing electric charge inside an electrical conductor and then releasing that charge when a current is applied. This process is known as charging and discharging. The amount of charge that is stored in a tantalum capacitor is determined by the anode material used and the surface area of the anode. In the case of the 150D104X9100A2TE3, the anode is made of tantalum and has a relatively small surface area, resulting in a relatively low capacitance of 100 µF. The 150D104X9100A2TE3 is a reliable and cost-effective solution for applications such as audio circuits and signal conditioning. Its small size makes it ideal for portable electronic products, while its long operating life and high temperature rating make it suitable for a wide range of industrial applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description