150D127X9010R2BE3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are used in many different applications. They are small, reliable, and offer high capacitance values. The 150D127X9010R2BE3 has been designed for use in areas with high current demands and needs to meet the high-reliability requirements of industrial and automotive applications.

This capacitor is constructed from a solid electrolyte, a tantalum anode, and a manganese dioxide cathode. The tantalum anode is surrounded by the solid electrolyte, while the manganese dioxide cathode is encased in a metalized layer called the cathode end stack. The electrolyte, along with the anode and cathode, is protected by an epoxy coating.

This capacitor is powered by a direct current source, such as 5V or 12V, and its capacitance can be adjusted in increments of 10 pF to 850 μF. Its rated capacitance is 10 μF to 2250 μF. The capacitor will automatically adjust to the power supply and maintain the rated capacitance.

The 150D127X9010R2BE3 has a wide operating temperature range of -55°C to +125°C, which makes it suitable for use in industrial as well as automotive applications. The device is also resistant to moisture, shock, and vibration.

The main purpose of the 150D127X9010R2BE3 is to ensure a stable voltage and current during peak loads. It also helps to reduce electrical noise and improve system performance. The capacitor is typically used in systems such as power-supply filters, motor control circuits, switching power supplies, H-bridge circuits, and power amplifiers.

In terms of its working principle, the 150D127X9010R2BE3 functions by storing electrical energy, which can be released when needed. This is achieved by establishing a charge at the material interfaces between the anode and the electrolyte. When a voltage is applied as input to the capacitor, the current flows through the anode, moving into the cathode and then the electrolyte. This establishes the charge at the interfaces, causing the capacitor to store energy.

When the voltage input is released, the charge stored in the capacitor is released in the form of current. This way, the capacitor can provide power to a load when needed, even if the input voltage is no longer present.

The 150D127X9010R2BE3 tantalum capacitors are a reliable and cost-effective solution for high capacitance requirements in areas such as industrial, automotive, and power electronics. These capacitors are easy to install and their high temperature range makes them suitable for a variety of applications.

The specific data is subject to PDF, and the above content is for reference