150D224X0100A2TE3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are an important component in many electronics applications. They are used in circuits where the load current is low or the component size is critical. They are often used as part of clocking and timing components and as part of decoupling or snubbing circuits. The 150D224X0100A2TE3, in particular, is a three-terminal tantalum capacitor with a Molded Chip Array construction.

The main feature of the 150D224X0100A2TE3 is its small size, which makes it suitable for a variety of applications. It is available in three different footprints: 0.5” x 0.6”, 0.7” x 0.8”, and 1” x 1.2”, with capacitance values of up to 100µF. It is designed to operate over a temperature range of -55°C to + 125°C and is rated for 1,000 hours of operation.

The 150D224X0100A2TE3 is a three-terminal tantalum capacitor that uses a special construction technique that enhances the mechanical strength of the device and allows for increased capacitance density. In this construction, the tantalum plates are deposited on both sides of an insulating sheet and the entire assembly is covered with an epoxy material. The disadvantage of this construction is that the capacitor cannot be easily repaired if damaged, so use with caution.

The 150D224X0100A2TE3 is a polarization-sensitive capacitor, meaning that it must be placed in the proper orientation when installing it in a circuit. One plate is marked with a ‘+’ sign and the other plate is marked with a ‘-’ sign. The capacitor should be connected such that the marked plate is connected to the positive power source. Failure to observe this precaution may result in catastrophic failure of the capacitor.

The 150D224X0100A2TE3 is typically used in applications where a high capacitance density is required, such as clocking and timing circuits, decoupling circuits, and power supplies. Its small size makes it suitable for use in a variety of mobile and portable devices. It is also widely used in medical equipment, where its reliability and high capacitance densities are essential.

The 150D224X0100A2TE3 capacitor is a surface-mount device that operates by using the electrolytic principle. In this principle, the capacitor has two plates separated by an insulating dielectric material. As current flows between the plates, an electric field is established and it causes a storage of electrostatic energy. This energy is released when the circuit is opened, and the capacitor will discharge itself. The longer the duration of the current flow, the more charge is stored in the device, giving the capacitor a higher capacitance.

The 150D224X0100A2TE3 is a highly reliable and durable component that has a long track record of success in a variety of applications. Its small size and high capacitance density make it suitable for use in mobile and portable devices, medical equipment, clocking and power supply circuits, and more. Its polarization-sensitivity should be kept in mind when installing it in a circuit, as failure to properly observe this precaution could result in failure of the component.

The specific data is subject to PDF, and the above content is for reference