150D274X9100A2BE3

Lifetime @ Temp.:	1000 Hrs @ 125°C
Failure Rate:	--
Features:	General Purpose
Ratings:	--
Manufacturer Size Code:	A
Lead Spacing:	--
Height - Seated (Max):	--
Size / Dimension:	0.135" Dia x 0.286" L (3.43mm x 7.26mm)
Package / Case:	Axial
Mounting Type:	Through Hole
Series:	TANTALEX®, 150D
Operating Temperature:	-55°C ~ 125°C
ESR (Equivalent Series Resistance):	--
Type:	Hermetically Sealed
Voltage - Rated:	100V
Tolerance:	±10%
Capacitance:	0.27µF
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Tantalum CapacitorsTantalum capacitors, also known as electrolytic capacitors, are the most widely used type of capacitors in electronic circuits. They are made of a semiconductor material, typically tantalum oxide, that is sandwiched between two flat plates, each of which contains an electrode. The electrodes are charge-separated, meaning one is positive and the other is negative. This creates a tightly sealed unit which can store electric energy.The unique properties of tantalum allow the capacitor to store much more energy than traditional ceramic capacitors. These properties also allow for much smaller capacitors to store the same amount of energy. This makes them ideal for use in small electronic devices, as they can fit into increasingly small circuit boards.150D274X9100A2BE3 Application Field and Working PrincipleThe 150D274X9100A2BE3 application field is mainly used in computer hardware, communications equipment, consumer electronics, and other electronic products. It is a polyester/tantalum series capacitor, and its capacitance is 0.0047 uF. This capacitor is very small, and is suitable for use in circuits with limited space and high miniaturization. The working principle of this capacitor is the same as that of all tantalum capacitors. Its electrodes are made of tantalum oxide and are separated from each other by an insulating material. When a voltage is applied to the capacitor, electrons transfer to the tantalum oxide electrode. This creates an electric field, which stores energy. This energy can be further released when the voltage drops or reverses.ConclusionIn conclusion, the 150D274X9100A2BE3 application field and working principle have been discussed. It is a special type of tantalum capacitor that is most commonly used in computer hardware, communications equipment, consumer electronics, and other electronic products. Its small size makes it ideal for use in electronics with limited space and high miniaturization. The working principle of this capacitor is the same as all other tantalum capacitors; its electrodes are made of tantalum oxide and the electric field they create stores energy. This energy can then be further released when the voltage drops or reverses.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description