150D474X0060A2T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are an important part of a variety of electronic products and have been found in a wide range of consumer and industrial applications. They are widely used in a variety of applications and are available in various form factors, from chip and surface mount packages to cylindrical can and axial leaded parts, which greatly increases their application adaptability. 150D474X0060A2T is an example of a tantalum capacitor, generally used to provide a physical and electrical connection between two electrical components and as an energy storage device.

The core component of a tantalum capacitor is a layer of tantalum powder pressed into a pellet and sintered inside an anode lead wrapped in an insulating sleeve. The anode lead is then surrounded with a conductive terminal that serves as the cathode lead. Adding a thin layer of oxide film over the anode lead creates the dielectric layer, which is in turn covered with a layer of manganese dioxide, a conductive material that acts as the second electrode. The metal outer case is then used to encase and protect the dielectric and electrode layers.

The 150D474X0060A2T tantalum capacitor has a capacitance value of 47uF, and is rated for an operating temperature of -55C to +125C, with a voltage rating of 10VDC. The physical design of the tantalum capacitor is a single-in-line chip component and measures 1.45 mm in length by 6.3 mm in width. The tantalum powder used in capacitance construction is encased in an epoxy coating, which offers a level of physical protection against damage from thermal shock, vibration and corrosion.

In terms of applications, 150D474X0060A2T capacitors are commonly used as decoupling capacitors in power supply circuits for power electronics due to their efficient low-voltage characteristics. They are also used for energy storage in power supplies that require high accuracy and reliability. These capacitors can also be used in audio systems, where they are used to filter out unwanted frequencies and reduce electrically induced noise. Besides, they can also provide circuit level protection against interference from high frequency signals and act as harmonic filtration.

The working principle of a 150D474X0060A2T tantalum capacitor is based on the fact that when two plates with different conductive properties are charged, charge flows across these two plates. In this case, the tantalum pellet is used as the anode and manganese dioxide as the cathode. When a voltage differential is introduced at the ends of the capacitor, charge is stored at the anode. As current passes through the capacitor, the stored charge is released or absorbed, depending on the type of circuit.

In summary, the 150D474X0060A2T tantalum capacitor is a reliable and efficient energy storage device used in a wide range of applications. It is constructed from an anode lead, an oxide film, and a manganese dioxide layer enclosed in an epoxy coating and metal casing. This capacitor is mainly used as a decoupling capacitor in power supply circuits, a low-voltage capacitor in audio systems, and a harmonic filtration and EMI shield for circuit level protection. The working principle of this type of capacitor is based on the differences in conductivity between the tantalum pellet and manganese dioxide, which builds up or dissipates depending on the type of circuit.

The specific data is subject to PDF, and the above content is for reference