16YXF220MEFCTA8X11.5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are a type of capacitors that use a solid electrical conductive anode, usually aluminum, covered with an electrically insulating oxide layer, along with a liquid or solid electrolyte as the cathode. The 16YXF220MEFCTA8X11.5 belongs to this type of capacitor. This device is used in a range of applications, usually involving the transfer or filtering of voltage.

The applications of the 16YXF220MEFCTA8X11.5 range from filtering and smoothing out DC noise on motor control circuits, to more complex switch mode circuit design. The capacitor can provide a significant voltage step-up/step-down to power supply ‘ribbon stripes’ and bus-bars. Additionally, this device has been used to stabilize power supply ripple and to filter the AC component in order to provide stable, DC current.

The working principle of the capacitor is based on the principles of electrochemistry. When an electric current is passed through the capacitor, a current of opposite polarity, or ‘back-current’ is generated. This back-current is stored in the electrolytes and acts to reverse the current passing through the anode and cathode of the capacitor. This repeated ‘charge’ and ‘discharge’ of the capacitor results in a decrease in voltage, resulting in a low-value injection for the circuit in which the capacitor is incorporated.

In order to protect the capacitor, the 16YXF220MEFCTA8X11.5 is designed with a protective cover to avoid any damage during the product transportation. Furthermore, it is designed with two temperature coefficient marks for the application of -20/+85°C and -55/+85°C respectively. The capacitor also features two power loss ratings specific to the operating temperature range, with dissipation factor values reaching 0.2 at +20°C/1kHz, and 0.19 at +85°C/1kHz. In addition, the device also has a ±20% tolerance rating with capacitance range from 47 to 100,000uF.

When incorporated into a circuit, the 16YXF220MEFCTA8X11.5 is designed to act as a filter, smoothing out sudden voltage spikes or drops that may occur. Additionally, it can help reduce the power loss caused by sudden voltage increases. Furthermore, this device is also designed for electrical noise reduction in low-frequency applications and is capable of handling high-currents.

In short, the 16YXF220MEFCTA8X11.5 belongs to the family of aluminum electrolytic capacitors and has a multitude of applications, including smooth DC current and electrical noise reduction, as well as power loss reduction in low-frequency applications. It is designed with protective measures to minimize damage during transportation and features two temperature coefficient marks, two power loss ratings, and a ±20% tolerance rating for capacitances between 47 and 100,000uF.

The specific data is subject to PDF, and the above content is for reference