1722533023-03-B9

Jumper Wires

Jumper wires are electrical wires consisting of two thin insulated wires with pre-attached sockets – most commonly in two, three or four lengths. They are used in many electronics projects for construction, prototyping or testing. Typical uses include connecting components onbreadboards or directly soldering them in circuits, attaching potentiometers to circuit boards, and checking continuity of circuits.

Jumper Wires come in different sizes and shapes, most commonly standardized sizes of 0.1in (2.54 mm) or 0.05in (1.27mm). The insulated wires usually have a gauge of 22 AWG (0.33 mm2) or 24 AWG (0.205 mm2). The length of jumper wires depends on their purpose and usually range from 2 cm to 5 cm.

Pre-Crimped Leads

Pre-crimped leads are used in various electronic projects in a variety of designs and lengths. Pre-crimped leads are commonly used to facilitate the use of header pins, circuit board test points and other components. The lead comes in a variety of pre-specified lengths and includes a tin plated copper wire spliced to a pre-crimped terminal. The terminal is usually tin or gold plated and available in various sizes to fit the component.

Pre-crimped leads come in different shapes and sizes to suit specific applications. The most popular shapes are straight or right angle and they are available in wires of ranging lengths, from 15 cm to 50 cm. Pre-crimped lead sizes vary from 0.75 mm²to 2.00 mm².

1722533023-03-B9 Application Field and Working Principle

The 1722533023-03-B9 is a crimped jumper wire (type of pre-crimped lead) used for common electrical tasks such as connecting two components together, prototyping, testing of equipment and construction. The 1722533023-03-B9 is available in different sizes, from 0.5 to 1.7 mm, and is suitable for use in a temperature range between - 55C to + 125C. This jumper wire is made from tinned-plated copper wire with insulation over each wire, to protect it from shocks and corrosion.

The 1722533023-03-B9 works by connecting two points together with a crimped-terminal. The terminal is crimped onto one end of the wire, which ensures quick connection. The insulation which coats the jumper wire also makes sure that the connection remains safe and there is no risk of any electrical damage or short circuiting of the connection.

The 1722533023-03-B9 is often used in projects such as robotics, computer wiring, automotive wiring and heavy machinery wiring. It can be used in a variety of applications where a reliable, quick and efficient connection is required. Additionally, the jumper wire can be used as an alternative to traditional soldering methods, and is much easier to install and repair than a soldered connection.