1722533112-06-A0-D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper wires are electrical components used to connect one electrical circuit to another. Jumper wires are commonly used to bridge gaps in electrical circuits, bypass electric resistors, circuits, or components, or to form a link between a power supply and a device. The type of jumper wire most commonly used is a single core wire with a plastic or ceramic insulation, although high-temperature wires are also available.

Jumper wires come in various sizes and lengths, including a variety of wire insulation, with a rated current up to 12 Amps. Standard AWG sizes range from 20 AWG to 28 AWG, while other sizes such as 30 AWG or 34 AWG are also available. Depending on the application, the jumper wire may need to be insulated to protect against accidental short-circuits or to provide a slight bit of insulation to reduce interference.

Pre-Crimped Leads

Pre-crimped leads are commonly used to make connections between electrical components. These leads typically consist of a length of metal-stranded cable, a crimp terminal, and plastic insulation. Crimping is the process of compressing and forming the lead into the desired shape and size. Many components come with pre-crimped leads already attached to the component and ready for use.

Pre-crimped leads are typically more reliable than soldered connections, as the crimp connection is physically stronger and less prone to dislodging or short-circuiting. Additionally, pre-crimped leads are easier to install and less time consuming than soldering, making it the preferred method for a wide range of electrical installations. Pre-crimped leads are also usually less expensive than soldered connections.

1722533112-06-A0-D Application Field and Working Principle

The 1722533112-06-A0-D is a specialty jumper wire with a special pre-crimped lead that fits into an airplane terminal. This jumper wire is primarily used to connect the left and right terminals of aircraft systems. The 1722533112-06-A0-D jumper wire is a single core wire with a plastic insulation and can handle up to 12 Amps.

The working principle of this jumper wire is relatively simple. When the wire is attached to both the left and right terminals of the system, it creates an electrical connection between the two terminals which allows electricity to flow. This electrical connection then allows the system to operate as it was designed.

The advantages of using the 1722533112-06-A0-D jumper wire is that it is a reliable and cost-effective solution for aircraft electrical systems. Due to the pre-crimped lead, it is much easier to attach and removes the need for soldering. Additionally, the plastic insulation helps to protect against accidental short-circuits or interference.

The specific data is subject to PDF, and the above content is for reference