1766884-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Backplane connectors are an important piece of hardware and are often used to create interconnects between a board and a module in power supplies, servers, and other technology platforms. In order to get the most out of these connections, the specific backplane connector used should guarantee reliable operation and provide sufficient physical strength and electrical performance. 1766884-2 is one such backplane connector type, characterized both by its application field and working principle.

1. Application Field

1766884-2 is a cost effective, high-density, signal connector with a board-to-board connection or multiple board connections. This connector, which is half-pitch less in comparison to the common connector, is found to be widely used in the various industrial space. The most common applications include controller based applications, military and aerospace, test equipment, instrumentation, medical, transportation, office automation and networking systems.

It is also found suitable for use in profibus networks, relying on fast communication and data transfer applications. This type of connector combines impressive transmission speed and is designed to perform up to the expectations in a wide variety of applications where reliable quality of operation is an utmost requirement.

1766884-2 is contained in a black nut and has an open-ended thread, allowing it to be installed into almost any situation. The housing is designed to disperse heat and prevent thermal damage to the connector, making it ideal for High-Rise applications.

2. Working Principle

1766884-2 works using the standard IEEE 802.3 Ethernet specification. This includes a set of rules and standards that governs the way in which Ethernet communications takes place. The primary component of this specification is the Medium Access Control (MAC) layer, which is responsible for controlling and managing access to the Ethernet medium.

The MAC layer defines the data frames in Ethernet data packets and defines the physical layer connection used for line encoding, data rate, and media access control. 1766884-2 connectors are designed to conform to the Ethernet standard provided in IEEE 802.3, making it possible for the same physical layer connections to be used in different networks.

The Ethernet standard operates at 10 Mbps, 100 Mbps, and 1000 Mbps. The higher speed allows for more reliable and efficient operation, and in turn, reduces latency, meaning that it takes less time to transmit data between points over the network.

1766884-2 is composed of a terminal block connector with 18 positions and an insert to accommodate 20 contacts that are connected through the board-to-board connection. The maximum current that can be transferred is 2A and the overall voltage rating of this connector is rated at 40V. The different pins of this connector are fitted with insulation and can also withstand high temperatures.

Conclusion

In conclusion, 1766884-2 is an efficient and cost effective connector that is suitable for a range of applications, particularly in the industrial space. It is a high-density signal connector that conforms to the IEEE 802.3 Ethernet standard for physical layer connection and offers steady transmission speeds. It has an open-ended thread, making installation easy, and its components are designed to protect from heat and thermal damage. It has an overall voltage rating of 40V and can transfer up to 2A of maximum current, making it an ideal connector for reliable operation.

The specific data is subject to PDF, and the above content is for reference