1EZ150D10E3/TR12

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Zener - Single

The 1EZ150D10E3/TR12 is a diode in the category of Zener single diodes. It is a 1500mW-rated diode, with a minimum breakdown voltage of 10V and minimum reverse voltage of 12V.

A Zener diode is a general purpose, silicon-based, rectifying diode that is characterized by its marked ability to withstand relatively high reverse voltages. Its distinctive feature is its ability to maintain a very small, but significant, voltage drop (typically 0.7V to 5V) across its anode and cathode terminals.

The 1EZ150D10E3/TR12 is a highly efficient device, thanks to its very low reverse leakage current that is typically five orders of magnitude lower than that of a standard rectifier diode. This low reverse leakage current allows for very small power dissipation across the diode.

The 1EZ150D10E3/TR12 can be used in a wide variety of applications, such as:
- In power supplies to regulate and stabilize output voltage,
- As a high-efficiency rectifier in both AC and DC switching converters,
- As a voltage-limiting device in AC inverters and various other power control solutions.

The 1EZ150D10E3/TR12 is an efficient solution to many power circuit design requirements. It can be used to reduce the risk of electrical shocks, by blocking high-voltage surges. It can also be used in various other applications such as as voltage regulators, current limiters, and over-voltage protection circuits. Moreover, in high-frequency applications, it provides excellent frequency response and improved stability.

The working principle of the 1EZ150D10E3/TR12 is quite simple. This diode is based on the Zener effect, which is a phenomenon that causes a voltage breakdown and the flow of current in the reverse direction, when the voltage applied to the diode is greater than a certain level. The voltage at which the diode breaks down is called the "Zener Voltage" or the "Breakdown Voltage". The breakdown voltage of 1EZ150D10E3/TR12 is 10V, with a minimum reverse voltage of 12V.

When the applied voltage is less or equal to the breakdown voltage of the 1EZ150D10E3/TR12, no current flows, and the diode works just like a standard rectifier. However, when the applied voltage exceeds the breakdown voltage, a reverse current flows and the diode acts as a voltage regulator.

In reverse bias mode, the 1EZ150D10E3/TR12 decreases the voltage across its terminals, thereby limiting the current flowing in the circuit. This reduces power consumption, thus allowing the circuit to operate more efficiently. This feature makes the device very useful in AC inverters, surge protection, high-frequency applications and other power control solutions.

The 1EZ150D10E3/TR12 is a highly efficient and cost-effective solution for voltage regulation, current limiting, and other power-control solutions. It offers improved voltage stability and frequency response compared to standard rectifier diodes, and can reduce power consumption levels significantly.

The specific data is subject to PDF, and the above content is for reference