1N4001GP-M3/54

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 1N4001GP-M3/54, or 1N4001GP, is a type of surface mounted silicon rectifier diodes. It is a single-phase rectifier, which means that it has the capability of converting alternating current (AC) to direct current (DC). The reason for using this type of rectifier is for it’s unique design that provides an exceptionally low reverse leakage current and improved heat dissipation. The 1N4001GP also has low forward voltage drop, so it can be used in battery-powered devices, where maximum power transfer is not a priority.

The 1N4001GP-M3/54 is a part of the series of 1N400xGP general-purpose rectifier diodes. The 1N4001GP has a nominal DC blocking voltage of 50V and a maximum average forward current rating of 0.54A. It also has a maximum peak reverse voltage of 50V, maximum peak reverse current of 9.2mA, and a maximum RMS forward current of 0.3A. In addition, the 1N4001GP has a peak forward surge current rating of 6A and a maximum reverse recovery time of 100 microseconds. The diode has a junction temperature range of -55 to +125oC.

These diodes are commonly used for power supply applications such as bridges for converting AC input to DC output, voltage regulation, rectifying power supply circuits, snubber diodes, and light dimmers. They can also be used in automotive applications such as anti-lock brake systems, starter motors, fuel pumps, wiper motors, and battery chargers.

The 1N4001GP’s working principle is based on the diode’s construction. It is constructed using a semiconductor material with a p-type layer and an n-type layer, which are separated by a very thin layer of metal that is deposited on the semiconductor material. When a DC voltage is applied to the diode, the current flow is blocked in the forward direction, and the voltage across the diode remains at approximately 0.6V. This voltage is known as the forward voltage drop, or ‘knee voltage’. When the forward voltage drop is exceeded, current begins to flow in the forward direction and the diode begins to conduct electricity.

When an alternating current is applied to the 1N4001GP, the current flow alternates between the positive and negative sides of the input voltage. The reverse voltage drop of the diode allows the device to block current in the reverse direction, as the diode always blocks current flow in the direction of the negative side of its input voltage. This allows the diode to act as a rectifying element, as it will only allow current to flow in the forward direction.

In addition to its use in rectifying high voltage AC, the 1N4001GP-M3/54 can also be used in switching circuits, where it can be used as an on/off switch. The diode allows current to pass when it is forward-biased and blocks current when it is reverse-biased. This makes it an ideal device for use in high-speed switching circuits.

Finally, the 1N4001GP-M3/54 can also be used in low-frequency regulating circuits. It is used to reduce the ripple voltage, as it acts as a voltage regulator by removing the unwanted AC signal from the output voltage. This allows for a filtered and clean signal to be supplied to the components connected to the diode.

The 1N4001GP-M3/54 is a reliable and efficient rectifier diode, as it has a wide range of applications in power supply and rectifier circuits. It has a low forward voltage drop, low power consumption, and excellent reverse voltage protection, making it an ideal choice for applications where maximum power transfer is not a priority.

The specific data is subject to PDF, and the above content is for reference