1N5350BG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are two-terminal devices which act as one-way electrical valves. Typically, one side is connected to a power source and the other to ground, and the device carries electricity only in one direction. Diodes are classified into several different types, each with a different intended application and working principle. One such type is the Zener diode, and this article will focus on a single device: the 1N5350BG.

The 1N5350BG Zener diode is an unidirectional diode with a 4.4 Volt Zener voltage and 200 mW power handling capability. It is a glass-encased device with a minimum breakdown voltage of 4.50 volts. The diode is mainly used as a voltage regulator in various applications. Because the device is a Zener diode, it has a reverse breakdown voltage, which is the voltage when it begins conducting current in the opposite direction to the intended one. This value stabilizes the voltage input and thus is useful in keeping the fluctuations of the output voltage of a circuit under control.

The 1N5350BG Zener diode can be used in a voltage regulator circuit. In this configuration, the diode is connected in parallel with a resistor between the supply voltage and ground, with a load connected to the point where the resistor and diode meet. The Zener voltage of the diode is set just below the input voltage, so that when the input voltage rises above the Zener voltage, the diode is turned on and allows current to flow, while still keeping the output voltage at the desired levels. Thus, the output voltage is regulated, as the voltage drop of the resistor and the Zener diode is equal to the voltage across the load.

The 1N5350BG Zener diode can also be used in switching circuits. When the voltage rises above the Zener voltage, the diode begins to conduct and, depending on the configuration of the load, can turn on or off the load. The diode can also be used in other applications, such as voltage reference, voltage multipliers, or as a clamping device.

In conclusion, the 1N5350BG Zener diode is a unidirectional diode that can be used in various applications. It has a Zener voltage of 4.4 volts and a power handling capacity of 200 mW. It is used in voltage regulators, switching circuits, voltage reference, voltage multipliers, and other applications. The device is ideal for various uses due to its low price and compact size, making it a popular choice for many applications.

The specific data is subject to PDF, and the above content is for reference