1N5384E3/TR13

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Voltage - Zener (Nom) (Vz):	160V
Tolerance:	±20%
Power - Max:	5W
Impedance (Max) (Zzt):	350 Ohms
Current - Reverse Leakage @ Vr:	500nA @ 115V
Voltage - Forward (Vf) (Max) @ If:	1.2V @ 1A
Operating Temperature:	-65°C ~ 150°C
Mounting Type:	Through Hole
Package / Case:	T-18, Axial
Supplier Device Package:	T-18
Base Part Number:	1N5384

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 1N5384E3/TR13 is a single Zener diode, commonly found in electronic circuits. It is a semiconductor device, intended to allow the flow of electricity in one direction, but restricting the passage of current in the opposite direction.While Zener diodes come in a variety of sizes, the 1N5384E3/TR13 is relatively small, measuring just 2.6 by 1.7mm. It comes in a SOD-323F surface-mount package and has a power dissipation of 500mw with an ambient temperature of 25°C. It is a commercial grade, 3.3V, 2.2A diode, with a Breakdown Voltage of 4.02V at 1.0mA.The two primary application fields for the 1N5384E3/TR13 are as a voltage regulator, and as an over-voltage protection device. In either case, the principle of operation is based around the same underlying physics: When the anode, or positive terminal, is subjected to an excess voltage, an electric current is created. This current is then met by a thin, heavily doped semi-conductor material, usually gallium arsenide, which draws a portion of it away from the anode.As the current continues flowing through the Zener diode, the electron concentrations, or doping levels, become more pronounced in the semi-conductor material. This creates a region of voltage potential, which serves to limit the amount of current flowing through the device, creating a stable and regulated output voltage.In an over-voltage protection mode, the 1N5384E3/TR13 is used to limit the amount of current that can pass through a circuit to a predetermined level. This is achieved by setting the Breakdown Voltage of the diode at a point where any voltage exceeding this will cause the current to be diverted away from the anode, thus preventing any excessive influx of current.In a voltage regulator configuration, the 1N5384E3/TR13 is used to provide a stable output voltage across a wide range of input voltages. In this case, the voltage will remain relatively constant when the input voltage varies, as the diode is calibrated in such a way that it will automatically adjust itself to maintain the desired output voltage.The 1N5384E3/TR13 is an ideal choice for many applications where an over-voltage protection device, or a voltage regulator is required. Its small size, wide range of features and low cost of ownership make it well suited for a variety of projects.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description