1N5388B/TR12

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

1N5388B/TR12 is a dedicated Zener diode which is designed to provide voltage regulation. It has a Zener voltage of 12 V and a power dissipation of 500 mW. The 1N5388B/TR12 is designed to protect against voltage overshoot and undershoot, to protect circuits from negative transients, and to protect active circuits from the effects of voltage and current surges. The 1N5388B/TR12 is a low-noise diode, which makes it well suited for signal conditioning applications.

The 1N5388B/TR12 has a Zener voltage of 12 V and a Zener resistance value of 7.5 ohms. The Zener current specification for the device is 20 mA. The 1N5388B/TR12 is capable of dissipating 500 mW of energy, which is sufficient for most applications. The device has low capacitance, which increases its efficiency. The 1N5388B/TR12 is capable of a reverse bias of 10 V.

The 1N5388B/TR12 has two primary applications as a Zener diode. It can be used as an active voltage regulator to protect electronic devices from voltage overshoot and undershoot, or it can be used as a clamping device to protect active circuits from the effects of voltage and current surges. The 1N5388B/TR12 is also useful in signal conditioning applications because of its low-noise characteristics.

The 1N5388B/TR12 has two terminals, an anode and a cathode. The anode is connected to the voltage source, while the cathode is connected to the load. When the terminal voltage across the device is less than the Zener voltage, the device behaves as if it is an open circuit and no current will pass through the device.When the voltage across the device is greater than the Zener voltage, the device will act as a resistor and current will begin to flow through the device. The current flow is limited by the Zener resistance of the device. The amount of current that can flow through the device depends on the Zener resistance of the device and the voltage across the device.

In summary, the 1N5388B/TR12 is a Zener diode designed to protect electronics from voltage overshoots and undershoots, to protect active circuits from the effects of voltage and current surges, and to provide low-noise characteristics for signal conditioning applications. The diode has a Zener voltage of 12 V, a Zener resistance value of 7.5 ohms, a power dissipation of 500 mW, and a reverse bias of 10 V. It has two terminals, an anode and a cathode, and behaves like an open circuit when the voltage across the device is less than the Zener voltage, and acts like a resistor when the voltage across the device is greater than the Zener voltage.

The specific data is subject to PDF, and the above content is for reference