1N5398GPHE3/54

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are used most commonly in the form of rectifiers, creating a rectangle shape on a graph due to its non-linear behavior. A single rectifier is a device that converts alternating current (AC) to direct current (DC). The 1N5398GPHE3/54 is a general-purpose rectifier with an average forward current of 5.4A and a repetitive peak reverse voltage of 400V. It has a variety of applications and a few distinguishing features.

Features

The 1N5398GPHE3/54 has a low thermal resistance that allows high efficiency and stable operation. It also comes with a copper lead frame and a glass passivation coating that offer high surge current capability and mechanical and insulation stability. Additionally, the rectifier can operate up to 150 degrees Celsius, and its peak forward surge current capability is 37A.

Applications

The 1N5398GPHE3/54 is most commonly used in power supply, battery charger, and UPS circuits. Its low forward voltage to reduce power loss and noise as well as its high surge current capability makes it particularly suited for applications where higher stability and efficiency are needed. Additionally, the rectifier can be used in circuits that require overvoltage protection such as those for security systems, office equipment, and computer peripherals.

Working Principle

The 1N5398GPHE3/54 works on the principle of rectification, which converts AC signals into DC signals. This is achieved by using two p-n junctions which causes a voltage drop and provides a converter in which only one direction of electric current can flow. During the positive half of an AC cycle, the current flows from the anode to the cathode, and during the negative half, current flows from the cathode to the anode. By this action, an alternating current is regulated as a directional current.

Conclusion

The 1N5398GPHE3/54 rectifier is a general-purpose rectifier with an average forward current of 5.4A and a repetitive peak reverse voltage of 400V. It has features such as a low thermal resistance, a copper lead frame and a glass passivation coating, and a high surge current capability. The rectifier is mostly used in power supply, battery charger, and UPS circuits due to its low forward voltage, high surge current, and overvoltage protection capabilities. The rectifier works on the principle of rectification, which converts AC signals into DC signals. By using two p-n junctions, this rectifier can regulate an alternating current as a directional current.

The specific data is subject to PDF, and the above content is for reference