1N5822-E3/54

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

1N5822-E3/54 is one of the common single rectifier diodes available in the market to its consumers. Rectifier diodes are used to convert AC to DC. 1N5822-E3/54 is a three-terminal rectifier diode with a very efficient power handling capability and a high surge current rating. It has a metal-oxide semiconductor (MOS) construction and an environmental rating of 1000 volts.

This single rectifier diode in itself has a wider range of applications. It is used in power supplies and peripheral circuits in direct current applications. 1N5822-E3/54 can also be used as the main switch in switching power supplies, as the main copper switch of the main switch controller(s) or as a rectifier in uninterruptible power supplies. Apart from these, it is also useful in low-noise power supplies provided by computers, telecommunications, audio/video chip sets and other sensitive circuits.

The working principle behind this single rectifier diode is based on the fact that it contains two channels of electrons - one for conduction of electrons in one direction and the other for conduction in the opposite direction. It works as an electronic gate, in which the electrons can pass through only one channel - the channel maintained by the applied voltage. This does not happen immediately; however, after the initial time delay of a few nanoseconds. The electrons coming in through a source (that is, a power supply or a peripheral circuit) pass through the lower resistance channel, while the electrons coming out of the drain go through the higher resistance channel.

1N5822-E3/54 has a silicon-controlled switch construction that allows it to handle very large output voltages. The maximum output voltage is 1000V DC and the maximum rated current is 2A. The gate-to-source voltage, or the voltage applied across the gate and source of the device, must not exceed 10V DC. Its temperature range is -40 to +125°C and its leakage current is 0.05mA at 25°C. Its breakdown voltage is 850V and its turn-on time is 1 to 6 us.

1N5822-E3/54 is a very reliable product, as it has a high surge current rating and a low forward voltage drop. It is also very easy to install into a circuit, as its terminals are suitable for soldering. Moreover, it requires only minimum voltage and current to be able to operate effectively.

In short, 1N5822-E3/54 is a very efficient single rectifier diode which has a wide range of applications. It has a very efficient power handling capability and a high surge current rating. With its low forward voltage drop and its single-channel configuration, this diode is a very reliable product. Its suitable terminals and its wide temperature range makes it very easy to install, and thus broadens the scope of its applicability. Therefore, it is suitable for use in various direct current applications.

The specific data is subject to PDF, and the above content is for reference