1N5922BPE3/TR8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 1N5922BPE3/TR8 is classified as a single Zener diode, which is a type of diode specifically designed to produce a specific, stable voltage when placed in direct current (DC) circuits. Constructed from semiconductor material and designed with a reversed P-N junction, Zener diodes are mainly used to regulate voltage by clamping its output to a specific voltage. This makes the 1N5922BPE3/TR8 ideal for applications such as voltage regulation, lineAR regulation, and signal level clamps.The 1N5922BPE3/TR8 is designed for use in such areas as general purpose clamps and secondary switching regulators. It is suitable operation in both AC and DC circuit applications, and is available in SOD -123FL, SOT-123 and SOT -323 packages. It features a nominal zener voltage of 5.6V and a maximum zener impedance of 1 ohm, a 5.6V zener voltage and 4 volts zener knee. It also features a maximum reverse leakage current of 5 microamps and a maximum forward voltage drop of 0.35V.The 1N5922BPE3/TR8 operates by using the characteristics of a P-N junction diode to allow an electric current to pass in one direction and resists in the other. It is designed to allow a forward current of up to 250 mA to pass through, while in reverse bias condition, the electric current is blocked until the voltage exceeds its breakdown voltage. At this point, the electric current increases exponentially. The zener voltage of the 1N5922BPE3/TR8 specifies the breakdown voltage, ensuring that the output of the diode stays consistent and within a specific range.When used as a circuit protection, the 1N5922BPE3/TR8 can prevent overvoltage in the system. When reverse bias current protection is required, the diode operates by creating a voltage drop between its anode and cathode. It thus eliminates high voltage spikes and prevents the voltage from exceeding the specified levels. When the voltage reaches the breakdown voltage, the current passes through the device, activating it and holding it until the voltage drops below the breakdown voltage again.In many applications, the 1N5922BPE3/TR8 is used as a reference voltage for AC and DC voltage signals. In this type of circuit, the diode produces a constant reference voltage for its output. The reference voltage is maintained regardless of the input voltage, allowing for smooth and steady voltage control. The 1N5922BPE3/TR8 is also commonly used in combination with other components to form a lineAR power regulator. This type of circuit is used to maintain a constant voltage in order to protect electronic systems from power surges and other abrupt voltages.The 1N5922BPE3/TR8 is also used in projects such as voltage monitoring, threshold mode switching, overvoltage protection and output power stabilizing. Additionally, it is used in debug telemetry, AC lineAR cordless phones and other electronic devices. It is also used in a variety of automotive applications, such as automotive alternators, generators, batteries and cell phone charging.In conclusion, the 1N5922BPE3/TR8 is classified as a single Zener diode, designed for applications such as voltage regulation, lineAR regulation, and signal level clamps. It is available in SOD -123FL, SOT-123 and SOT -323 packages, and operates by using the characteristics of a P-N junction diode. It is suitable for operation in both AC and DC circuit applications, and its features include a nominal zener voltage of 5.6V and a maximum zener impedance of 1 ohm, a 5.6V zener voltage and 4 volts zener knee, and a maximum reverse leakage current of 5 microamps and a maximum forward voltage drop of 0.35V. The 1N5922BPE3/TR8 is designed for use in such areas as general purpose clamps and secondary switching regulators and is used in many applications, including voltage monitoring, threshold mode switching, overvoltage protection and output power stabilizing.

The specific data is subject to PDF, and the above content is for reference