1N708A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 1N708A diode is a single, Zener diode typically used in electronic circuits to regulate the amount of voltage in a component. It serves as a voltage reference, providing a bidirectional flow of electrical current. A Zener diode has two main functional areas, its breakdown region and its operating region. When a Zener diode enters its breakdown region, it has the ability to allow a large amount of electrical current to flow in either direction until the voltage is equal to the diode’s breakdown voltage level, the so-called zener voltage. The zener voltage of a 1N708A diode is 7.5Volts. The most common applications of the 1N708A Zener diode are in voltage regulator circuits, overvoltage protection circuits and surge protection circuits.

Zener diodes operate in a low power environment by exploiting their reverse breakdown point. When a Zener diode experiences a reverse voltage which exceeds the defined breakdown voltage of the diode, the diode begins to conduct, allowing current to flow through the diode in both directions. This is known as a low power mode. As the voltage across the diode continues to increase, the diode begins to act as a resistor, allowing only a predetermined amount of current to flow.

The 1N708A Zener diode contains a single PN junction, usually made from silicon. The device works by using a reverse bias voltage to create a depletion region at the junction, which is essential to achieve breakdown in a forward-biased direction. In its reverse breakdown region, the diode has negative resistance, meaning the current flows through the diode without an increase in voltage. In its forward-biased region, the diode behaves like a resistor.

When operating a 1N708A diode, it is important to be aware of the fact that the diode’s capability to remain in its breakdown region depends on the current being supplied and the amount of reverse voltage applied to the diode. For this reason, it is important to select a diode with a breakdown voltage and current that is appropriate for the application. It is also important to ensure that the breakdown voltage of the diode is lower than the supply voltage, otherwise the diode will not remain in its breakdown region and the circuit will not operate properly.

The 1N708A Zener diode is used in a number of different circuit applications, including voltage regulators, overvoltage protection, surge protection, and even flyback protection. In voltage regulator circuits, the diode is used to provide a constant output voltage, regardless of changes in input voltage, allowing the rest of the circuit to operate without having to adjust the voltage levels. In overvoltage protection circuits, the diode is used to protect other components from being damaged by sudden spikes in voltage. In surge protection circuits, the diode is used to protect components from being damaged by sudden surges in current. In flyback protection, 1N708A Zener diodes are used to protect other components from the magnetic flux of high voltage transformers.

In conclusion, the 1N708A diode is a single, Zener diode, named for its ability to remain in its breakdown region even when exposed to high levels of reverse biased voltages. It has a wide range of applications in electronic circuits, and is used both as a voltage regulator and in overvoltage, surge and flyback protection circuits. The device works by using a reverse-biased voltage to create a depletion region at the junction, allowing current to flow through the diode in both directions. Due to its robustness and reliable performance, the 1N708A diode is an essential component in a wide variety of electronics applications.

The specific data is subject to PDF, and the above content is for reference