1N968A

Series:	--
Packaging:	Bulk
Part Status:	Active
Voltage - Zener (Nom) (Vz):	20V
Tolerance:	±10%
Power - Max:	500mW
Impedance (Max) (Zzt):	25 Ohms
Current - Reverse Leakage @ Vr:	5µA @ 15.2V
Voltage - Forward (Vf) (Max) @ If:	1.1V @ 200mA
Operating Temperature:	-65°C ~ 175°C
Mounting Type:	Through Hole
Package / Case:	DO-204AA, DO-7, Axial
Supplier Device Package:	DO-7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Zener - Single

The 1N968A application field and working principle introduces a type of single zener diode. This diode can be used in a variety of applications, including voltage regulation, surge suppression, clamping, and transients protection. This article describes the application field and working principle of the 1N968A in detail.A single zener diode is an electronic component that allows electric current to flow in one direction while blocking current in the reverse direction. Unlike other diodes, a zener diode is designed to be able to regulate voltage. It does this by controlling the amount of current that can flow through the device, causing it to act as a voltage regulator.In a typical application for the 1N968A, the zener diode is connected in series with a resistor to create a voltage regulator. The resistor is used to limit the flow of current and prevent excessive currents from flowing. The diode is connected across the load, with its anode connected to the supply and its cathode connected to ground. When the load is connected, the current flowing through the diode and resistor will be limited to the point where the diode\'s zener voltage is achieved.The 1N968A can also be used in circuits that require protection from transients, such as in high-voltage surge protection circuits. When operating in this type of application, the diode is connected in series with a resistor, with the resistor connected between the power supply and the load. The diode is then placed across the load and its anode connected to the supply and its cathode connected to ground. When a transient is present, the resistor limits the current flow and the diode clamps the voltage at its zener voltage, which helps to protect the circuit from excess voltage.The 1N968A can also be used in a clamping circuit. When operating in this type of application, the zener diode is used to limit the maximum voltage of the circuit by clipping the peaks above a certain predetermined voltage. This allows the circuit to protect itself from voltage spikes, preventing damage from occurring.In addition to its applications in regulation, protection, and clamping, the 1N968A can also be used as a low-voltage signal detector. In this application, the diode is connected in series with the signal, where it acts to limit the maximum voltage of the signal. This helps to make sure that the signal does not exceed a certain voltage level and allows the signal to be processed safely.The 1N968A is a single zener diode with a wide range of applications. It can be used in a variety of applications, such as voltage regulation, surge suppression, clamping, and transients protection. Additionally, it can be used as a low-voltage signal detector. This diode is a reliable and important component in many circuits, and its wide range of applications makes it a versatile and useful device.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description