200LLE5.6MEFC8X9

Polarization:	Polar
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	0.413" (10.50mm)
Size / Dimension:	0.315" Dia (8.00mm)
Lead Spacing:	0.138" (3.50mm)
Ripple Current @ High Frequency:	112mA @ 100kHz
Ripple Current @ Low Frequency:	56mA @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	LLE
Operating Temperature:	-40°C ~ 105°C
Lifetime @ Temp.:	12000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	200V
Tolerance:	±20%
Capacitance:	5.6µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors: 200LLE5.6MEFC8X9 application field and working principle

Aluminum electrolytic capacitors, also known as Al-Ele capacitors, are a type of capacitor that uses an electrolyte to achieve a larger capacitance per unit volume than other types. They use two aluminum foil electrodes separated by an insulating layer such as paper, mica, Teflon, or ceramic. A sheet of electrolyte chemically bonds with the foil. Due to their greater surface area, these capacitors allow higher electrical charges than most other types of capacitors. Aluminum electrolytic capacitors are the most widely used type of capacitor.The 200LLE5.6MEFC8X9 model from the 200LLE series is a sealed-in-place aluminum electrolytic, non-solid, screw-terminal capacitor with tough cases and long life. It is specifically designed for applications in telecommunications and electronic system applications with high energy storage and long life. The nominal capacitance value of this model is 5.6mF, with an operating temperature range of -40°C to +85°C, and a rated voltage of 16V. It has a maximum operating temperature of -40°C to +300°C, and a tolerance range of ± 20%. Aluminum electrolytic capacitors use two layers of aluminum foil as the electrodes rather than a single dielectric layer. This gives them the ability to hold higher charge than other types of capacitors, and they are often used in high voltage applications. One of the two aluminum layers is etched to increase surface area, which increases the capacitance of the capacitor. The electrolyte provides a connection between the two aluminum layers, allowing the capacitor to store the charge. When a voltage is applied across the two aluminum layers, the pressure of the electrolyte causes the electrons to flow from one layer to the other. This causes the aluminum to be ionized, which creates an electric field. This field maintains the charge, and since the electrodes are separated by a dielectric, a charge holds until it is discharged. Aluminum electrolytic capacitors are commonly used in power supplies, amplifiers, and power supplies. They are also used in medical devices due to their ability to provide high energy storage, low voltage drop, and low leakage. Due to their large capacitance, they are commonly used as decoupling capacitors, bypass capacitors, coupling capacitors, and timing capacitors.Aluminum electrolytic capacitors are generally inexpensive, easy to manufacture, and have a long service life. They also have a high dielectric absorption, which is important for carrying high current in a very short time. Despite their advantages, they have some disadvantages like their limited range of capacitance and voltage. They also require additional components such as a snubber network to reduce in-rush current.In conclusion, the 200LLE5.6MEFC8X9 is an Aluminum electrolytic capacitor that is designed for applications in telecommunications and electronic systems. It has a nominal capacitance value of 5.6mF and it can operate from -40°C to +300°C. It is an inexpensive and highly reliable capacitor, but it must be used with appropriate components to prevent in-rush current.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description