2020-23T-A1LF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 2020-23T-A1LF is a type of Gas Discharge Tube Arresters (GDT), and these devices are useful for protecting devices connected to electronics from excessive signals or surges. GDT devices contain two electrodes, a cathode and an anode, between which spark-gaps are created when voltages higher than the breakdown voltage are applied. This breakdown voltage is usually determined by the characteristics of the gas within the tube. When a surge or excessive voltage is encountered, a spark gap is created between the two electrodes, and the electrons are allowed to flow from the cathode to the anode. This flow of electrons creates a current which is able to transfer to the other devices connected to it, without creating a permanent damage.

In the case of the 2020-23T-A1LF, this arrester is designed with oxide-filled, spark-gap structures. The oxide filling allows for a lower breakdown voltage than is normally found with a spark gap, making the product better for protection applications. The spark gap in this arrester is formed using titanium plated electrodes. The use of oxide as the filling is further beneficial because it reduces the possibility of electrical shorts, while still allowing the spark gap to be effective at preventing excessive voltage from damaging the connected device.

The operation of the 2020-23T-A1LF follows a simple principle. When the applied voltage rises above the breakdown voltage of the Spark Gap, electrons are released from the cathode which passes through the spark gap to the anode. This current causes an inductive kick in the connected circuits, which is then filtered by the arrester. The purpose of this is to divert the excessive voltage away from the system, without causing any permanent damage to the components.

Apart from protecting electronics, GDTs can also be used in lightning protection applications. To maximize the efficiency of the arrester, it is recommended that the device is connected to a suitable lightning discharge system. This system should be designed in such a way that it can filter the surge in the shortest amount of time, enabling the device to eliminate any hazardous charges or currents. This will also prevent any possible damages to the devices connected to the system.

The 2020-23T-A1LF is an example of an effective electrical arrester made specifically for protecting devices from excessive voltages or surges. The use of a spark gap and oxide filling makes it a robust device that can be used in different applications. It also offers effective protection against lightning, provided that it is installed with an appropriate lightning discharge system. This makes it a reliable and cost-effective protection solution.

The specific data is subject to PDF, and the above content is for reference