2020-42T-C2LF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas Discharge Tube Arresters (GDTs) are devices used to protect electrical devices and systems from voltage transients. These devices are made up of two electrodes, a gas-filled cylinder, and a spark gap. The two electrodes are separated by the gas-filled cylinder. When the voltage between the two electrodes becomes higher than the breakdown voltage of the gas, an arc occurs, which causes the electricity to be diverted away from the protected system. The spark gap is a gap which is added to the arrester to ensure that current flows do not become too high and damage the protected system. The GDTs have two working principles, depending on their design.

The first type of arrester is the Overvoltage Protective Arrester (OPA). This type of arrester is designed to divert current away from the protected system in the event of a transient overvoltage condition. In the case of an OPA, the spark gap is designed to break down before the breakdown voltage of the GDT. This causes the arrester to divert the electricity away from the protected system, before it can reach the breakdown voltage. This ensures that a transient overvoltage condition does not cause damage to the system.

The second type of arrester is the Transient Limiting Arrester (TLA). This type of arrester is designed to limit the amount of current that can enter the system during transient overvoltage conditions. The spark gap is designed to have a low voltage rating, which allows the voltage to rise much more gradually than with an OPA. This ensures that only a small amount of current is diverted away from the protected system, reducing the risk of system damage. Additionally, the spark gap of a TLA can be set to trip at a relatively low voltage, meaning that even during a large transient, the system is still protected.

2020-42T-C2LF is an example of a TLA. This type of arrester is designed to have a high surge rating, making it suitable for shielding electrical systems from overvoltage transients. The arrester is composed of two electrodes, a gas-filled cylinder, and a spark gap. The spark gap is set to trip at a relatively low voltage rating, meaning that the arrester will divert only a small amount of current away from the protected system. This ensures that the system is completely protected from overvoltage transients.

In conclusion, gas discharge tube arresters are designed to protect electrical systems from voltage transients. There are two types of arresters, the OPA and the TLA, depending on their design. The 2020-42T-C2LF is an example of a TLA, which is designed to reduce the amount of current diverted away from the protected system during an overvoltage condition. By using GDTs, electrical systems can be protected from overvoltage transients, thus reducing the risk of system damage.

The specific data is subject to PDF, and the above content is for reference