2026-26-C2F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas Discharge Tube Arresters (GDT) play an important role in protecting electronic and electrical equipment from lightning, over-voltage and other power related damage. The 2026-26-C2F application field and working principle is one of the most widely used GDT technologies. This article examines the application field and working principle of 2026-26-C2F.

The application field of 2026-26-C2F is basically divided into two categories. The first category of application field includes medium, low and high voltage AC networks, particularly in places such as circuit breakers, power couplings, power transformers, lightning protection and other high-voltage equipment. The second category of application field includes telecommunications, power distribution networks, signal and control, undervoltage, and industrial equipment.

The 2026-26-C2F GDT uses a reverse-biased diode circuit with a gas discharge tube in the center. The schematic diagram is shown in figure one. The diode has two electrodes which are connected in series with a high-voltage source. When a surge voltage reached a specified value, the large reverse voltage on the diode will destroy its P-N junction. This will result in the formation of a low impedance discharge arc across the diode, which then results in the flow of high-voltage current to the gas discharge tube. The gas discharge tube then acts as a protective device to limit the surge voltage and dissipate any excess energy.

The 2026-26-C2F gas diode also includes a number of components which are used to improve its performance. The first component is a spark gap which is used to protect the diode from excessive voltage and current. The diode is also protected by the second component, a current limiting resistor, which is used to limit the amount of current flowing through the diode during a surge. The third component, a capacitor, is used to provide a form of energy storage which helps to further reduce the surge voltage. The fourth component, a varistor, is used to provide a high impedance at the surge voltage, thus limiting the amount of energy that can be dissipated.

In conclusion, the 2026-26-C2F application field and working principle is an important GDT technology which is used in many AC and telecommunications applications. The diode is protected by the spark gap and current limiting resistor while the capacitor and varistor provide additional protection. With the combination of these components and the gas discharge tube, the 2026-26-C2F is an effective and reliable means of protecting electronic and electrical equipment from damage caused by lightning, over-voltage and other power related events.

The specific data is subject to PDF, and the above content is for reference