2037-42-A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas Discharge Tube Arresters (GDT)

GDTs are electrical protection devices that limit the voltage of an alternating current system to a level that can avoid damaging the electrical equipment. They are used in a number of different situations, such as lightning protection, overvoltage protection, and overcurrent protection. The main function of GDTs is to provide protection against electrical surges. GDTs can be either self-contained or connected to other devices. This article will focus on a specific type of gas discharge tube arresters, the 2037-42-A.

The 2037-42-A GDT is a medium-to-high energy aspect ratio device. This type of arrester is used for impulse voltage and discharge current limitations in medium-voltage power systems. It is installed at certain locations to provide reliable and efficient protection against any form of transient over-voltages. The features of the 2037-42-A include superior arc-quenching performance, a low let-through voltage, and low arc energy during arcing.

The 2037-42-A has two main components: a spark gap and a gas-filled tube. The spark gap is located at the front end of the device and is filled with a spark gap type material. This material allows for the transfer of electric current between two electrodes. It is mainly used for overvoltage protection. The gas-filled tubes are located in series with the spark gap and contain a mixture of noble gases. This mixture creates a conductive medium which aids in the discharge of the arc current.

The 2037-42-A GDT can be used in applications such as power transmission towers, wind farms, electrical distribution systems, and telecommunications systems. When the device is connected to the AC system, it responds to overvoltage and overcurrent spikes caused by lightning strikes, switching operations, and other forms of surges. It then discharges the excess electrical energy without allowing dangerous amounts of voltage to reach the protected equipment.

The 2037-42-A GDT can be used in systems with up to ±1 kV of alternating current. The surge protection performance of the device depends on its installation location, type of surge, and the surge protection level which must be set. This arrester also provides protection against transients with frequencies between 20 kHz and 500 kHz. The device has a breakdown voltage of 2.2 kV and a maximum continuous operating voltage of 0.8 kV.

When 2037-42-A GDTs are installed in a system, it is important to ensure that its grounding impedance is below 2 ohms. The device also needs to be mounted at a 90-degree angle to ensure the optimal performance. It is also important to note that the device is not suitable for DC systems, it only functions with AC systems.

In conclusion, the 2037-42-A GDT is a reliable and efficient device for protecting electrical systems from transient over-voltages. It provides superior arc-quenching performance, a low let-through voltage, and low arc energy during arcing. It can be used in telecommunication systems, power transmission towers, wind farms, and other locations where protection against overvoltage and overcurrent spikes is required. Proper grounding and mounting of the device is needed to ensure optimal performance.

The specific data is subject to PDF, and the above content is for reference