20ETS12STRL

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	1200V
Current - Average Rectified (Io):	20A
Voltage - Forward (Vf) (Max) @ If:	1.1V @ 20A
Speed:	Standard Recovery >500ns, > 200mA (Io)
Current - Reverse Leakage @ Vr:	100µA @ 1200V
Capacitance @ Vr, F:	--
Mounting Type:	Surface Mount
Package / Case:	TO-263-3, D²Pak (2 Leads + Tab), TO-263AB
Supplier Device Package:	D2PAK
Operating Temperature - Junction:	-40°C ~ 150°C
Base Part Number:	20ETS12

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Rectifiers are commonly used in electronics and electrical circuits. Single phase bridges often provide the most economical solution for AC to DC conversion. The 20ETS12STRL is a full-bridge rectifier with high surge and low forward voltage ratings. This component is perfect for applications where precise circuit regulation is required or for areas where efficient conversion from alternating to direct current is desired with minimal power loss. This article will discuss the application field and working principle of the 20ETS12STRL.

Application

The 20ETS12STRL is the most commonly used component for converting AC to DC. It is an ideal component for power conversion due to its low forward voltage and high-surge ratings. The component has been designed for use in a variety of applications including:

• Switch-mode power supplies
• Uninterruptable power supplies
• Battery chargers
• Automotive and industrial lighting
• Air conditioning and heating

In addition, the component is also used in a variety of other applications such as solar cells and LED lighting.

Working Principle

The 20ETS12STRL is a full-bridge rectifier which consists of four diodes. Each diode is connected in a bridge configuration which allows the component to convert alternating current to direct current. It works by allowing current to flow through the bridge in one direction only. When voltage is applied to the input of the bridge, the two diodes at the top of the bridge allow current to flow in one direction only. The two diodes at the bottom of the bridge then allow current to flow in the opposite direction. This allows the component to only allow current to flow in one direction, and thus convert from AC to DC.The component also has a high surge rating, which indicates its ability to withstand large peak currents with relatively small voltage drops. This makes the component more efficient, as less energy is lost due to power conversions. The component also has a low forward voltage rating, which indicates its ability to start conducting current at a lower voltage than other rectifiers.

Conclusion

The 20ETS12STRL is an ideal component for use in AC to DC conversion due to its low forward voltage and high-surge ratings. Its four diodes are connected in a bridge configuration which allows the component to convert alternating current to direct current. The component is most commonly used in applications such as switch-mode power supplies, uninterruptable power supplies, battery chargers and automotive and industrial lighting. Its high-surge and low forward voltage ratings make it an efficient and reliable component for these applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description