228LBA100M2DD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are a type of capacitor which uses an anode made of an aluminum oxide film as one of the electrodes. They are designed to provide a large amount of energy storage at a relatively low cost. The 228LBA100M2DD is one such model, and it is used in a variety of applications in electronics. This article will discuss the application fields and working principle of the 228LBA100M2DD.

Firstly, the 228LBA100M2DD is widely used in consumer and industrial applications to provide energy storage and filtering. It can be used to help smooth out the voltage fluctuation in an electrical system, which can protect sensitive components and devices from damage caused by power surges. It is also commonly used in power supplies, as it helps provide a constant source of current, allowing the equipment to operate reliably. The 228LBA100M2DD also finds use in inverters and uninterruptible power supplies (UPSs), which provide a continuous and reliable source of power in the event of an outage.

In addition, the 228LBA100M2DD is often used in audio and video applications, as it can help deliver a clean signal to the output stage. It can help reduce noise and interference that can degrade signal quality, and it can provide “headroom” for transient peaks in the signal. This makes it ideal for use in audio systems and television sets, providing clean and consistent audio and video playback.

Now let us turn to the working principle of the 228LBA100M2DD. It consists of a large number of aluminum oxide formed on an aluminum foil. These aluminum foil layers are rolled up and placed onto the electrolyte solution. This creates a barrier between the two charging electrodes, and the electric current is able to flow through it. The capacitance of the capacitor is defined by the capacitance of the insulator, and the capacitance of the electrolytic liquid. The 228LBA100M2DD offers a capacitance of 100 μF and a voltage rating of 16 VDC.

In addition to the working principle, it is also important to understand how to properly install the 228LBA100M2DD. The device should be placed in an area with adequate ventilation, as the generation of heat from the capacitor can cause it to deteriorate over time. It should also be placed away from any source of heat or moisture, which can cause the capacitor to short out. Finally, the capacitor should be connected to its load using thicker wires, as shorter runs of wire can increase the voltage drop across the capacitor.

In conclusion, the 228LBA100M2DD is a type of capacitor that is used in a variety of consumer and industrial applications. It is valued for its relatively low cost and its ability to store and filter electrical energy. The working principle of the 228LBA100M2DD is based on the formation of aluminum oxide layers on an aluminum foil, which create a barrier between the two charging electrodes. It is also important to properly install the 228LBA100M2DD, as incorrect installation can cause the capacitor to fail prematurely.

The specific data is subject to PDF, and the above content is for reference