25LC010AT-I/MC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Memory is a crucial component in any computing system. The 25LC010AT-I/MC is a specialized piece of memory that has a variety of applications and a unique working principle. This article provides a detailed overview of the 25LC010AT-I/MC memory, including its usage and functioning. The 25LC010AT-I/MC is a serial Electrically Erasable Programmable Read-Only Memory (EEPROM). It is a non-volatile memory, meaning that the data stored in the memory will not be lost in the event of power failure or other power-related issues. The memory can be programmed and erased without the need for additional external control signals.The 25LC010AT-I/MC is clocked with a frequency of 6MHz and is compatible with a wide range of microcontroller/microprocessor buses. It is composed of 128 x 8-bit non-volatile memory. The memory can store up to 1,000 instructions or 1K bytes of data, with each individual byte being programmable. The memory also features self-timed programming, allowing for data to be written into the memory with minimal microcontroller overhead.The 25LC010AT-I/MC has a variety of applications, including use in communications systems, embedded systems and microprocessors. It can be used to store data, from simple configuration settings to large program sequences. It can also be used for data logging and other data-intensive tasks.The 25LC010AT-I/MC has a unique working principle. It operates on an internally controlled program algorithm that can detect a logic-low instruction write signal from the user. When this signal is detected, the memory will put itself into program mode and begin the programming process. The instruction write is necessary to confirm that the user wishes to fully erase or program the memory. The programming procedure is initiated when the instruction write is synchronized with the clock of the memory.During the programming process, the appropriate bits of the 8-bit words are read in a sequential manner and encoded. The bits can then be stored in the memory cells. This process is repeated until all bits of the data are programmed into the memory.Once the programming process is completed, the 25LC010AT-I/MC can be put into a standby mode, where it will wait for the transmission of instruction to switch between read and write states. To erase data from the memory, a logic-low erase signal is required. This signal will switch the memory back into the program mode, which can then be used to erase the programmed data.In summary, the 25LC010AT-I/MC is a versatile memory device that can be used in a variety of applications. It features a unique working principle and can store up to 1K bytes of data. The memory can also be programmed and erased without the need for additional external control signals.

The specific data is subject to PDF, and the above content is for reference