2EZ14D10E3/TR12

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Voltage - Zener (Nom) (Vz):	14V
Tolerance:	±10%
Power - Max:	2W
Impedance (Max) (Zzt):	5.5 Ohms
Current - Reverse Leakage @ Vr:	500nA @ 10.6V
Voltage - Forward (Vf) (Max) @ If:	1.2V @ 200mA
Operating Temperature:	-65°C ~ 150°C
Mounting Type:	Through Hole
Package / Case:	DO-204AL, DO-41, Axial
Supplier Device Package:	DO-204AL (DO-41)
Base Part Number:	2EZ14

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

2EZ14D10E3/TR12 Application Field and Working PrincipleDiodes, in general, are two terminal semiconductor devices which allow current to pass in one direction and block it in the other. As such, they are often used in power supplies and other circuitry to regulate voltage and current. Zener diodes are a type of diode which when used in reverse bias work like a resistor, allowing a certain voltage to pass through, but prevent any voltage beyond that value. The 2EZ14D10E3/TR12 is a Zener diode with a breakdown voltage of 12V and peak reverse current (Izm) of 10mA.The 2EZ14D10E3/TR12 has a variety of applications. It is mainly used in circuit designs with switching power supplies and battery-powered electronics, particularly where small long-term current consumption is required. Additionally, it can be used in low-voltage lighting applications such as LED or small-format incandescent lamps. It is also used in feedback circuits and current regulation across diode arrays.The working principle of the 2EZ14D10E3/TR12 is relatively simple. In a reverse bias configuration, when the voltage applied across the two terminals is lower than the breakdown voltage, no current flows. When the applied voltage is greater than the breakdown voltage, the diode allows a certain amount of current to flow, which is determined by the amount of current the diode is configured to handle. This current is then used to regulate the voltage level, thus providing protection from overvoltage and voltage variations. As such, the 2EZ14D10E3/TR12 acts as a voltage-regulated circuit breaker, protecting electronic components from overvoltage and voltage fluctuations.In conclusion, the 2EZ14D10E3/TR12 is a Zener diode with a reverse breakdown voltage of 12V and a peak current of 10mA. It is primarily used in switching power supplies, lighting designs, and feedback circuits. The diode’s working principle is based on a reverse-biased configuration, where it allows the passage of a certain amount of current determined by the current-handling capability of the diode, thus providing protection from overvoltage and voltage variation.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description