35YXG1200MEFC16X20

Aluminum electrolytic capacitors are a type of polarized capacitor which have the advantage of being able to store a large amount of charge for its size. The 35YXG1200MEFC16X20 is an aluminum electrolytic capacitor which is widely used in a variety of electronic devices.

An aluminum electrolytic capacitor operates on the principle of electrolysis. One side of the capacitor consists of a metal foil with a dielectric oxide coating which is wound up. This foil acts as the positive plate of the capacitor. The other side is an aluminum foil which is covered with an electrolyte paste. This acts as the negative plate of the capacitor. When a voltage is applied, an electrical current flows through the electrolyte paste which causes a layer of oxide to form on the aluminum foil. This oxide layer increases the surface area of the capacitor, allowing it to store an higher amount of charge.

35YXG1200MEFC16X20 aluminum electrolytic capacitors are used in a wide variety of electronic applications such as audio equipment, power supplies, LED lighting, inverters, and motor controls. The characteristics of the 35YXG1200MEFC16X20 aluminum electrolytic capacitor make it ideal for such applications. Its low ESR (equivalent series resistance) and low impedance make it suitable for use in high frequency applications, while its high capacitance ratio allows it to store a considerable amount of charge.

35YXG1200MEFC16X20 aluminum electrolytic capacitors have a range of operating temperatures from -40°C to +105°C. The maximum peak voltage that can be applied is limited to 63V DC. Other characteristics of the 35YXG1200MEFC16X20 include a tolerance of ±20% and a life of up to 8000 hours depending on the operating temperature and voltage.

In summary, 35YXG1200MEFC16X20 aluminum electrolytic capacitor is a reliable and cost-effective component that is suitable for use in a variety of electronic applications. It is widely available in the market with different specifications and is well suited for applications where high capacitance, low ESR, and low impedance are desired.