381LQ182M180K452

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors, or “Al-caps” are electronic components that are used in many electrical circuits. The purpose of an Al-cap is to reduce ripple, stabilize voltage, or block unwanted high frequency signals. There are two types of Al-caps, non-polar and polarized. Non-polar Al-caps do not have a positive and negative lead, so any voltage can be applied across them. This type of Al-cap is often used when the applied voltage is not switching polarities. Polarized Al-caps require a positive voltage at one lead and a negative voltage at the other lead. These types of Al-caps are used when the applied voltage will switch polarities or higher stable voltage output is required.

The specific Al-cap part number, 381LQ182M180K452, is a polarized type. It has a working voltage of 18 VDC, a tolerance of ±20%, and the operating temperature range is -25°C to +85°C. It is a surface-mount type and has a size of 2.2 mm x 1.6 mm. Its lead spacing is 80% of lead diameter. The capacitance is 180 μF (µF, Microfarad).

The two basic components of an Al-cap are an anode, made of electrolytic aluminum foil, and a cathode, which is typically made of a metal oxide. In between the two is the dielectric, an electrolyte material that is impregnated into the anode layer. As voltage is applied across the the anode and cathode, electrons flow from the anode layer to the cathode layer, creating a charge storage. This charge storage is what gives Al-caps their unique properties of high capacitance, low ESL (equivalent series resistance) and low ESR (equivalent series inductance) in a very small size.

Al-caps have many applications, from small consumer electronics to industrial motor drives. They are used in low and high frequency AC switching power supplies, DC-to-DC converters, voltage multiples, audio and video amplifiers, etc. Al-caps are also often used in timing circuits such as clocks, frequency oscillators and filters. As power supplies become more efficient, the need for better voltage regulation is increasing, and Al-caps are often called upon to do the job.

Al-caps can also be used in circuits to reduce noise and increase filtering performance of the design. The dielectric of an Al-cap is a very effective barrier against RF (radio frequency) interference. Al-caps are also very reliable in most environments and can even withstand some levels of shock and vibration, making them a good choice for motorized equipment and other applications where such conditions may exist.

In summary, Al-caps are versatile components used for a variety of applications. The 381LQ182M180K452 is a polarized type with 18VDC working voltage, a capacitance of 180μF and a temperature range of -25°C to +85°C. Al-caps are used in power supplies, voltage regulators, filter networks, clocks and timing circuits, as well as to reduce noise and interference. They are reliable, small in size, and reasonably priced, so they offer a good value for the cost.

The specific data is subject to PDF, and the above content is for reference