400LLE1.5MEFCT78X9

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are one of the most common and widely used capacitor types. These capacitors are constructed of two aluminum foils separated by absorbent paper that has been impregnated with electrolyte. The aluminum foil has a large surface area and is etched alloy with a metal oxide coating on one side, and a conducting material (usually graphite) on the other. A voltage is applied to the two plates, causing the metal oxide to dissolve, allowing electric current to flow from one plate to the other.

The 400LLE1.5MEFCT78X9 aluminum electrolytic capacitor has a maximum working voltage of 50 volts, which means the applied voltage should not exceed this value. This type of capacitor also has a maximum ripple current rating of 1.5A and a capacitance tolerance of +/-20%. This means that the capacitance of the capacitor may be up to 20% higher or lower than its specified value.

The 400LLE1.5MEFCT78X9 aluminum electrolytic capacitor is typically used in the power electronics industry because of its high power handling capability. It is used in applications such as power supplies, motor drives, UPS systems, and inrush current limiter circuits. The capacitor has a high ripple current rating, which allows it to handle high frequency pulses and reduce voltage peaks in power supplies. It is also used for EMI/RFI filtering and decoupling applications.

The working principle of this aluminum electrolytic capacitor is based on the fact that electric current flow occurs when the potential difference between the two plates is large enough. When a voltage is applied to the plates, a charge distribution is created across the plates that causes electric current to flow. The positive plate will accumulate positive ions on its surface, while the negative plate will accumulate negative ions. The electric current will continue to flow until the charge reaches equilibrium, or until the applied voltage is reduced to a level that does not create an imbalance between positive and negative ions.

In summary, the 400LLE1.5MEFCT78X9 aluminum electrolytic capacitor is a widely used type of capacitor due to its high power handling capability. Its maximum working voltage and ripple current rating make it suitable for power electronics applications such as power supplies, motor drives, UPS systems, and inrush current limiter circuits. Its working principle is based on the fact that electric current flow occurs when a voltage is applied to the two plates, allowing positive and negative ions to accumulate on the plates. This results in an electric current that continues to flow until the charge is balanced or the voltage is reduced to a level that does not create an imbalance between positive and negative ions.

The specific data is subject to PDF, and the above content is for reference