450BXW56MEFR14.5X30

Aluminum electrolytic capacitors are components commonly used in circuit boards, and are one of the most commonly used components in electronic products.

The 450BXW56MEFR14.5X30 is an aluminum electrolytic capacitor, which is a standard axial lead device and is available in several sizes. This type of capacitor has a working voltage of 450V, a capacitance of 56µF and a tolerance of 20%. The device has a long life expectancy of up to 2000 hours at 85°C and has a maximum operating temperature of 105°C.

Aluminum electrolytic capacitors are polarized capacitors, meaning the polarity of voltage applied to the capacitor must be observed. The positive lead of the capacitor should be connected to the positive voltage source and the negative lead should be connected to the negative voltage source. If this is not followed, the capacitor will be irreversibly damaged.

These capacitors are generally used for filtering applications where a relatively high capacitance is needed from a small package. The device can be used to store and filter DC power, as well as to connect two device signal points. It can also be used to filter AC signals such as amplifiers, filters, and power supplies.

The working principle of the 450BXW56MEFR14.5X30 aluminum electrolytic capacitor is based on the electric field created between two plates. The positive and negative electrodes of the capacitor are coated with an electrolyte and separated by a dielectric material. When voltage is applied to the capacitor, electric charges will be induced between the plates, forming a dielectric field. This dielectric field makes it possible for the capacitor to store electric energy and in turn, enable the device to act as a filter. By changing the capacitance, charging current and time constant of the capacitor, the frequency and gain of the signal can be adjusted.

In the applications of the 450BXW56MEFR14.5X30 aluminum electrolytic capacitor, the high rated voltage of 450V makes it suitable for many high voltage applications, and its long life expectancy makes it suitable for applications that require long-term operation. It is commonly used in high voltage applications such as DC motors, air conditioners, and power supplies, and in audio circuits where voltage filtering is needed.