450MXG330MEFC25X50

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are essential components for modern electronics, widely used in power supplies, sound equipment, signal processing, and other similar applications. The 450MXG330MEFC25X50 is an aluminum electrolytic capacitor that combines high capacitance, small size, and high reliability.

An aluminum electrolytic capacitor consists of two electrodes immersed in an electrolyte, usually a water-based solvent. Aluminum oxide forms a thin film over one of the two aluminum electrodes, acting as an effective insulation layer and allowing a higher voltage to be stored on a much smaller size. The longer the oxide film, the higher the capacitance of the capacitor.

The 450MXG330MEFC25X50 is an aluminum electrolytic capacitor that provides efficient and reliable operation even in the harshest of environments. Its high capacitance is achieved through the use of a large aluminum-clad anode and a high-temperature-resistant electrolyte, ensuring excellent energy storage and a long service life. Additionally, the capacitor has a wide operating temperature range and is rated for a maximum capacitance of 3300uF at 20 degrees Celsius, making it ideal for applications requiring long-term, stable power supply.

In terms of its application field, the 450MXG330MEFC25X50 can be found in a variety of applications such as frequency converters, air conditioners, automotive electronics, medical equipment, consumer electronics, and other related industrial products. It is particularly well-suited for energy applications, owing to its high capacitance and wide operating temperature range. Furthermore, its low-profile and low-leakage design makes it suitable for critical circuits where space is limited and leakage current must be kept to a minimum.

The working principle of the 450MXG330MEFC25X50 is quite straightforward. During operation, the negative voltage is applied to the anode, while the positive voltage is applied to the cathode. This causes a reaction in the electrolyte, where the electric field produced by the applied voltage increases the voltage between the anode and cathode, thus charging the capacitor. When the voltage reaches its maximum, the capacitor is considered to be charged.

When the voltage is disconnected, the capacitor will start to discharge, slowly releasing the stored energy back to the circuit. This process is known as “leakage current,” and is an important consideration when selecting a capacitor. The 450MXG330MEFC25X50 has low leakage current, making it an ideal choice for applications where long periods of inactivity are required.

In conclusion, the 450MXG330MEFC25X50 aluminum electrolytic capacitor is an excellent choice for applications requiring a reliable and efficient energy storage device. Its high capacitance and wide operating temperature range make it well-suited for a variety of applications, while its low-leakage design makes it suitable for circuits that require minimum leakage current.

The specific data is subject to PDF, and the above content is for reference