450MXH180MEFC25X30

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are a type of capacitor constructed by using an aluminum oxide layer as dielectric material, and aluminum, as the electrode material. The aluminum foil, immersed in an electrolytic solution, becomes the anode and the oxide layer acts as dielectric. This type of capacitor is particularly useful in applications where a high capacitance is needed in a small volume, and it is especially well suited for low-frequency applications due to its superior ripple current capability.

450MXH180MEFC25X30, is an aluminum electrolytic capacitor. It is an axial type, non-solid electrolytic capacitor, and has a ± 20% tolerance rating. This type of capacitor has an operating temperature range of -40°C to 105°C. Its capacity is 450μF, its rated voltage is 180V DC and its size is 25x30 mm.

The most common application for this type of capacitor is in power supply circuits, as input/output filtering, and as a dc bus capacitor for DC/DC converters or AC/DC inverters. Additionally, this aluminum electrolytic capacitor can be also used for energy storage applications starting from motor control through UPS.

The working principle of an aluminum electrolytic capacitor is based on creating a layer of insulating oxide of aluminum oxide on a sheet of aluminum foil. The oxide layer is formed using an electrolyte solution, and the anode of the capacitor is the aluminum foil. This electrolyte temporarily breaks down the oxide layer, so that electrons can pass through, allowing the aluminum foil to be used as a conductor. The capacitor also has two other plates; the cathode that is the positive terminal and a negative plate which connects the capacitor to other components in the circuit. As current flows through the positive terminal, electrons flow from the negative terminal and cause a build up of electric charge on the aluminum foil. This electric charge is then stored in the capacitor, and when the electric charge reaches a certain amount, voltage is established across the terminals, allowing the capacitor to act as a filter.

In conclusion, aluminum electrolytic capacitors are a type of capacitor used in a variety of applications and can provide higher capacitance, volumetric efficiency and lower leakage current than other types of capacitors. The 450MXH180MEFC25X30 aluminum electrolytic capacitor is suitable for applications such as input/output filtering, energy storage and dc bus capacitor in DC/DC power supplies or dy/dy inverters. It has a capacity of 450μF, a rated voltage of 180V DC, and an operating temperature range of -40°C to 105°C. The capacitor’s working principle is based on creating a layer of insulating oxide on the aluminum foil and the presence of the electrolyte allowing electrons to pass through and temporarily break down the oxide layer so the aluminum foil can act as a conductor.

The specific data is subject to PDF, and the above content is for reference