450MXH270MEFC30X29

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are a type of capacitors that use electrolytic principle as the working principle. The capacitance of the capacitor is determined by the area of ​​the aluminum foil, the type of electrolyte used, and the thickness of the oxide film on the aluminum foil. 450MXH270MEFC30X29 aluminum electrolytic capacitor is a voltage type capacitor, which is most widely used in various electronic products, especially in power electronic products.

The working principle of the 450MXH270MEFC30X29 aluminum electrolytic capacitor is based on the electrochemical properties of aluminum oxide. Both the anode and the cathode are aluminum foils and the non-polarized electrolyte itself is the separator. Due to the electrochemical reaction between the electrolyte and the aluminum surface, a layer of thermally stable insulating aluminum oxide film is formed on the surface of the aluminum plate, and the range of the dielectric layer is proportional to the applied voltage. This voltage-dependent insulating layer causes the capacitor to provide a certain degree of capacitance.

The bearing voltage of an aluminum electrolytic capacitor is generally only 1/10 of the DC rated voltage. Generally, aluminum electrolytic capacitors are mainly used as DC blocking caps, decoupling capacitors, general power supply filtering capacitors, high frequency bypass capacitors, temperature compensation capacitors, etc., which can filter out the interference signals on the signal bus or reduce the noise signal.

The 450MXH270MEFC30X29 aluminum electrolytic capacitor is a device that can store and release a certain amount of energy. Its main features are high capacitance, low cost and small size. In addition, it has good stability and the electric field around it is balanced relatively. It is usually used in the circuits that require a large capacitance such as power supply, motor control, microwave communication, etc.

The aluminum electrolytic capacitor can also be used for high-frequency signal transfer, active filter and frequency division in communication devices, so it is also widely used in television sets, amplifiers, intercoms, radios, toys, electronic ballasts, etc. And it can maintain the credibility of the signal and reduce the harmonic content of the current, which is good for signal conversion. Besides, it can also be used as bypass in power electronic products and as condenser microphone in mid- and low frequency signal transmission.

In summary, the 450MXH270MEFC30X29 aluminum electrolytic capacitor can be widely used in a variety of electronic devices and project fields. Its working principle is to form an insulating oxide film on the surface of the aluminum plate through electrochemical reaction, and the capacitance formed by the oxide film can be adjusted by the applied voltage. It is mainly used for DC blocking capacitor, decoupling capacitor, power supply filter capacitor, bypass capacitor and temperature compensation capacitor. It can filter out the interference signals on the signal bus or reduce the noise.

The specific data is subject to PDF, and the above content is for reference