450USG120MEFC25X25

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are polarized capacitors making use of aluminum oxide that acts as the dielectric. They are extremely useful, especially within electronic or electrical engineering applications, due to the fact that they can pack a lot of capacitance into a relatively small package. They are also relatively inexpensive compared to other types of capacitors, making them a suitable choice for many applications.

The 450USG120MEFC25X25 is an aluminum electrolytic capacitor from Panasonic with a rated voltage of 450 VDC, capacitance of 120 microfarads (µF), and an ESR (equivalent series resistance) of 3.99 milliohms. This particular capacitor is designed for use in a wide range of applications, ranging from LED lighting, motor drives, home appliances, automotive, and consumer electronics. It is a surface-mount component measuring 25mm x 25mm with lead-free terminations.

The primary purpose of this capacitor is to store electrical energy. When used in AC (alternating current) servo circuits, the capacitor is used in combination with a resistor and inductor to form an RC (resistor-capacitor) filter which filters out high frequency noise, thereby enabling the motor to receive a clean power signal. In LED lights and automotive lighting systems, the capacitor is used in combination with a transformer and a rectifier diode to provide the necessary amount of output power.

At its most basic level, the capacitor works by the principle of a voltage differential being established between two conductive plates. These plates are separated by a dielectric insulating medium. When an external voltage is applied to the plates, they become oppositely charged and an electric field is established which attracts and accumulates charge. This charge is stored as electrical energy.

Aluminum electrolytic capacitors contain an electrolyte which is a compound that is mainly made up of aluminum and oxide. The aluminum and oxide act as the dielectric medium and are the primary source of the capacitor’s high capacitance. The electrolyte is kept in direct contact with the capacitor’s metal plates. These plates are made of etched aluminum foil which is then rolled into a cylindrical form. The capacitor is then tightly sealed with an epoxy-based sealant to protect the electrolyte and keep it from evaporating.

The inner workings of the 450USG120MEFC25X25 aluminum electrolytic capacitor are quite complex. The main components are the power supply, capacitor body, dielectric material, and inductor. The power supply is responsible for providing the voltage that is needed to charge the capacitor body. The capacitor body contains the metal plates and the electrolyte, which are separated by a dielectric material. The inductor is necessary to allow the capacitor to release energy when needed.

The capacitor’s operation is controlled by the power supply’s input voltage, the inductor’s output impedance, and the value of the capacitor. When a voltage is applied to the capacitor body, a current is created. The current’s opposing force creates a pressure within the capacitor body. This pressure is then released when the capacitor is connected to an external resistor or inductor, allowing energy to be released.

The 450USG120MEFC25X25 aluminum electrolytic capacitor is designed to withstand harsh environment conditions, making it suitable for use in many industries. It is capable of operating up to 125°C at its extended rated voltage and is also resistant to vibration and shock. This makes it an ideal choice for use in consumer electronics, automotive, and industrial applications. With the right choice of materials and design, the 450USG120MEFC25X25 aluminum electrolytic capacitor can provide reliable performance for numerous applications.

The specific data is subject to PDF, and the above content is for reference