475SML050M

Series:	SML
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	4.7µF
Tolerance:	±20%
Voltage - Rated:	50V
ESR (Equivalent Series Resistance):	42.33 Ohm @ 120Hz
Lifetime @ Temp.:	2000 Hrs @ 85°C
Operating Temperature:	-40°C ~ 85°C
Polarization:	Polar
Ratings:	--
Applications:	General Purpose
Ripple Current @ Low Frequency:	24mA @ 120Hz
Ripple Current @ High Frequency:	36mA @ 100kHz
Lead Spacing:	--
Size / Dimension:	0.157" Dia (4.00mm)
Height - Seated (Max):	0.217" (5.50mm)
Surface Mount Land Size:	0.169" L x 0.169" W (4.30mm x 4.30mm)
Mounting Type:	Surface Mount
Package / Case:	Radial, Can - SMD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are widely used in electronics and electrical engineering. They have many uses, such as providing reliable decoupling or filtering of electrical signals, serving as energy storage components, and can also be used in power conversion applications. The 475SML050M is an example of an aluminum electrolytic capacitor. It is a radial-leaded component with snap-in legs that can be very useful in electronic systems.
The 475SML050M is a solid aluminum electrolytic capacitor. It has a rating of 5mm x 11mm x 5.8mm, and the capacitance at 10kHz is 4.7μF. Its maximum allowable ripple current is 4.3mA RMS, and its temperature range is from -40 to 125 °C. The ripple rating of the capacitor is rated to operate up to 5kHz, making it suitable for high frequency applications. The capacitor has a maximum operating voltage of 25V DC.
The 475SML050M has a variety of applications in electronics. For example, it can be used to provide low-noise decoupling for signal filtering applications. It can also be used in power conversion designs, such as DC/DC converters. It can be used to provide energy storage and smooth out voltage fluctuations. The capacitor can also be used for bypassing high-frequency, low-power signals, and as a resistor for a wide range of frequencies.
Understanding how the 475SML050M works is important for designing electronic circuits. Each capacitor consists of two aluminum plates separated by a thin insulation layer. This insulation layer is called the dielectric. An electrolyte is then used to complete the assembly. The current supplied to the capacitor causes an electrical charge to build up on the aluminum plates, creating an electric field between them. This electric field creates an electrostatic force that stores energy and allows current to flow between the plates.
The capacitor is able to store and release energy rapidly, due to its low equivalent series resistance (ESR). The ESR measures the total amount of resistance present in the capacitor and is often used to evaluate a capacitor’s performance. A capacitor with a low ESR will have less electrical losses, so it is able to charge and discharge quickly. This makes the 475SML050M ideal for high frequency applications, where rapid energy storage and release are required.
In conclusion, the 475SML050M is a solid aluminum electrolytic capacitor. It has a wide range of applications, such as providing reliable decoupling or filtering of electrical signals, serving as energy storage components, and being used in power conversion designs. The capacitor is also able to store and release energy rapidly, due to its low equivalent series resistance. The 475SML050M is therefore suitable for high-frequency applications where rapid energy storage and release are required.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description