4N35-X017T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are critical components in a wide range of devices, and the 4N35-X017T in particular, is a popular choice due to its transistor, photovoltaic output capability. Optoisolators are primarily used to isolate circuits, preventing electrical interconnection or energy transfer between them and can be used to protect expensive equipment from damage due to electrical interference. In a 4N35-X017T, the photovoltaic components are employed to confine the two separate sections of the circuit, while also allowing a transfer of information from one section to the other. This allows one circuit to monitor hazardous conditions in the other, to sound an alarm or shut the system down in case the condition is detected.

The 4N35-X017T is a zero-crossing optoisolator, meaning it has a built-in “zero-cross” protection that keeps the sensitive side of the device from being damaged by transient voltages. It accomplishes this by using a photovoltaic transistor, inside the package, that senses an abrupt change in the output current. When the current suddenly drops or rises, the transistor switches off the supply power automatically. This helps to protect the optoisolator from potential damage.

This device is widely used in a variety of industrial applications, such as monitoring motors and pumps, thermal over-current protection, as well as many other control circuits that require reliable isolation. The 4N35-X017T is especially beneficial in environments with fluctuating electrical conditions, since its zero-cross protection feature helps limit the impact of sudden fluctuations in voltage. What’s even better is the cost-effectiveness of the 4N35-X017T, as it is relatively inexpensive to manufacture.

The 4N35-X017T is also great for providing isolation in both AC and DC circuits, since it is capable of surviving a high-frequency cycle of AC loads and an abrupt rise or fall of DC loads. The way in which it works is by providing an electrical current across a LED that is connected to the AC/DC source, which in turn generates a voltage drop across the photovoltaic transistor attached to the other side of the circuit. When the current is high enough, the phototransistor turns off the circuit and provides isolation.

In summary, the 4N35-X017T is a cost-efficient optoisolator that offers reliable isolation for both AC and DC circuits. It is an ideal choice for applications that require reliable protection against sudden surges of voltage or current, due to its zero-cross protection feature. The 4N35-X017T is widely used in motor and pump monitoring, as well as thermal over-current protection and other control circuits that require reliable isolation.

The specific data is subject to PDF, and the above content is for reference