500D478M6R3FK2A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors, also known as aluminum electrolytic capacitors, are one of the most widely used electronic components with a wide range of applications in various areas. These components are characterized by their ability to store a fixed amount of electrical charge, and 500D478M6R3FK2A is a type of aluminum electrolytic capacitor. This article will discuss its application field and working principle.

Introduction

Aluminum electrolytic capacitors are usually made of thin aluminum oxide layers formed on aluminum metal foil. Due to its unique chemical and physical properties, anode oxide has become the best choice for the dielectric of aluminum electrolytic capacitors. The 500D478M6R3FK2A aluminum electrolytic capacitor is a polarized capacitor that is generally made of aluminum oxide and an electrolyte. It works by applying a positive voltage to the anode and a negative voltage to the cathode. It uses the effect of Faraday’s law of electrolysis, when the external potential is greater than the oxide potential, electrons can penetrate the oxide film.

Application Field

500D478M6R3FK2A aluminum electrolytic capacitors are widely used in power supplies, electric vehicle chargers, audio equipment, signal transmission circuits, computer peripheral device circuits, and automatic control circuits. In addition, it is also used to filter AC ripple, reduce noise, and store energy for high power applications. In industrial applications, these capacitors are used in motor start circuits. In audio equipment, these capacitors are used in noise suppression, speaker crossover networks, and To analyze the frequency division circuit. In addition, these capacitors can also be used to filter power supplies, suppress high frequencies, and stabilize electric vehicles.

Working Principle

When the 500D478M6R3FK2A aluminum electrolytic capacitor is energized, a positive voltage is applied to the anode and a negative voltage is applied to the cathode. The applied voltage causes an electric field to form between the two plates of the capacitor. This electric field will cause the electrons to move through the dielectric oxide layer, thus forming an electric field in the capacitor. In addition, the electric fields between the anode and the cathode will cause a current to flow in the aluminum foil between the two plates. This current will cause the oxide layer to form an electric field that will cause the charges in the oxide layer to move between the two plates.

When the 500D478M6R3FK2A aluminum electrolytic capacitor is discharged, the electric field in the capacitor will dissipate, and the charges in the oxide layer will be pushed back towards the anode and the cathode, resulting in the capacitor discharging. This process of charging and discharging will be repeated as long as the capacitor is connected to the power supply. As a result, the current stored in the capacitor will eventually be equal to the voltage power supplied.

Conclusion

In conclusion, 500D478M6R3FK2A aluminum electrolytic capacitor is a popular type of capacitor used in a variety of applications. It is characterized by its ability to store electrical charge and its relatively low cost. When charged, the electric field in the capacitor will cause electrons to move through the dielectric oxide layer and form an electric field. When discharged, the charge in the oxide layer will be pushed back towards the anode and the cathode, resulting in the capacitor discharging.

The specific data is subject to PDF, and the above content is for reference