50USC10000MEFC25X50

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are one of the most widely used types of capacitors in the electronics industry. They are used in a wide range of electronic devices, from consumer electronics to industrial and medical equipment. Their primary purpose is to store an electric charge, allowing an electric current to be used more efficiently.

An aluminum electrolytic capacitor, also known as an electrolytic capacitor, is a type of electrolytic capacitor with an aluminum electrolyte core with two layers of aluminum foil as the electrodes. The aluminum foil is then covered with a thin film of electrolyte, acting as a separator between the two layers. This design allows the capacitor to store a large amount of electrical energy, even at lower voltages.

The 50USC10000MEFC25X50 application field and working principle of aluminum electrolytic capacitors are based on the principles of electrochemistry. Electrochemistry is the science of studying the interaction between electrical charges and chemical reactions. Essentially, the capacitor works by allowing electrical charge to build up on one side of the capacitor until the voltage on that side of the capacitor is equal to the voltage on the other side of the capacitor. The amount of electrical energy stored is proportional to the difference between the voltage of each side.

In operation, the two layers of aluminum foil act as plates that hold opposite charges. The side of the aluminum foil with the larger voltage holds an anode and the other side holds a cathode. In between the two layers is an electrolyte, which allows the current to flow between the two layers and build-up charge on the capacitor.The electrolyte is typically a sodium or potassium based solution, or in some cases a paste or gel.

When current is applied to the capacitor, an electric field builds up between the two electrodes, causing a flow of electric charge from the anode to the cathode, and vice versa. This charge is stored in the form of an electric field, which creates an electrical potential or voltage across the aluminum foil layers. This voltage is different from the voltage applied to the capacitor, and is referred to as the "dielectric potential". The magnitude of the electric field is determined by the difference in voltage between the two sides.

Aluminum electrolytic capacitors are widely used in applications where a high capacitance and a high voltage are necessary, such as power supplies, audio systems, motors, and other higher power applications. They are also used in high frequency applications, such as RFID tags and other radio frequencies.

The 50USC10000MEFC25X50 is a specific type of aluminum electrolytic capacitor designed for use in high voltage, high voltage applications. It uses a half-inch diameter electrolytic core, and has a maximum operating voltage of 2000 V and a capacitance of 50μF. It is designed for use in industrial and medical equipment where high capacitance and high voltage are required.

Aluminum electrolytic capacitors are a reliable and cost-effective way to store electrical energy. They are easy to use, and can provide the high capacitance and long lifespan needed in many applications. Their unique construction also makes them ideal for high voltage, high voltage applications where durability and reliability is essential.

The specific data is subject to PDF, and the above content is for reference